FatShark - 250mW 5.8GHz A/V Transmitter

FatShark - 250mW 5.8GHz A/V Transmitter

FatShark - 250mW 5.8GHz A/V Transmitter

Retail Price: $54.99  $27.50 Save: 50% off

High Quality 250mW 5.8GHz transmitter.  Compatible with ImmersionRC, FatShark, and other Airwave based systems.  Cables are directly compatible with ImmersionRC equipment.

This is the same powerful 250mW TX included with the Predator and Attitude bundles.  When paired with NexwaveRF receiver and SpiroNet antenna range in excess of 2km is possible.
Transmitter includes 2p cable for power and 5p cable for camera harness.

Electrical: 

  • RF Module: NexwaveRF 
  • Power supply 7 - 17V (2S-4S supply) 
  • Power consumption: 330mA @7.4V (+camera supply) 
  • Power out (to camera) 5V, 350mA max 
  • Transmitting power: 250mW 
  • Operating Frequency: 5G8 (see below frequency chart) 
  • Channel select chart: 

1 2 3 4 
Ch1 5740 MHz On On On N/A 
Ch2 5760 MHz Off On On N/A 
Ch3 5780 MHz On Off On N/A 
Ch4 5800 Mhz Off Off On N/A 
Ch5 5820 MHz On On Off N/A 
Ch6 5840 Mhz Off On Off N/A 
Ch75860 MHz On Off Off N/A 

Antenna:

  • Antenna type: Supports linear and circular polarized 


Mechanical 

  • Dimensions: 55 X 26 X 12 mm 
  • Weight: 23g (with dipole antenna). 


Packaging 

  • Dimensions: 120 x 40 x 18 mm 
  • Weight: 40g 


Note: White connector on back of transmitter is for connecting an ImmersionRC TinyTelemetry 
accessory (adds Telemetry data to audio channel so plane can be tracked with the ImmersionRC 
antenna tracker for longer range)

  • Model: FS-2463
  • Shipping Weight: 0.15
  • In Stock


US Customers:
This equipment is being sold under the FCC’s amateur radio rules. Operators must abide by all applicable laws and hold an amateur license to operate this equipment. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. For information regarding obtaining an amateur radio license, please go to http://www.arrl.org/getting-licensed.

International Customers:
The use and operation of this product in your country may require an amateur radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the purchase and use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.

Order in the next 12hrs 11min and it ships today!

Additional Images

FatShark - 250mW 5.8GHz A/V Transmitter


Customers who bought this product also purchased...

IRC / FatShark FCC Transmitter to RMRC Female A/V Connector

IRC / FatShark FCC Transmitter to RMRC Female A/V Connector

Price:   $6.49
Great for adapting the standard ReadyMadeRC camera and transmitter connectors to plug in to the ImmersionRC / FatShark FCC & CE...
IRC / FatShark FCC Transmitter to RMRC Female A/V Connector

RMRC-420 420 Line CCD Camera (PAL)

RMRC-420 420 Line CCD Camera (PAL)

Price:   $49.99  $10.99 Save: 78% off
Mini Color Camera 1/3" Sony Color CCD 0.5 Lux, 420TVL, 30x30mm​​ ​​Also Includes: Camera bracket with screws Stock camera cable ...
RMRC-420 420 Line CCD Camera (PAL)

Neck Strap Balancer for Monitor Mount - Vertical

Neck Strap Balancer for Monitor Mount - Vertical

Price:   $4.99  $1.49 Save: 70% off
Neck Strap Balancer for Monitor Mount - Vertical mount style ​Works with radios that use a vertical style mount such as the Futaba 12FGA...
Neck Strap Balancer for Monitor Mount - Vertical

MPI Collet Prop Adapter: 2mm Shaft w/ 3/16", 5mm Prop Shaft

MPI Collet Prop Adapter: 2mm Shaft w/ 3/16", 5mm Prop Shaft

Price:   $4.50
Collet type prop adapter for 2mm shaft. Fits 3/16", 5mm prop hub diameter. Collet Style
MPI Collet Prop Adapter: 2mm Shaft w/ 3/16", 5mm Prop Shaft

RMRC - Flight Controller Standoff Kit

RMRC - Flight Controller Standoff Kit

Price:   $1.89
Contains: 4x Female to Female 10mm Nylon Standoffs 4x  Male to Female 10mm  Nylon Standoffs 8x M3x6mm Nylon screws
RMRC - Flight Controller Standoff Kit

RMRC Mako - Fuselage Bottom Protector

RMRC Mako - Fuselage Bottom Protector

Price:   $14.99  $5.25 Save: 65% off
Protect your Mako! This will keep your aircraft looking like new for many landings to come...
RMRC Mako - Fuselage Bottom Protector