RMRC - 1.3GHz 300mW Transmitter - INTL VERSION

RMRC - 1.3GHz 300mW Transmitter - INTL VERSION

RMRC - 1.3GHz 300mW Transmitter - INTL VERSION

Retail Price: $49.99

THIS IS THE INTERNATIONAL VERSION. WE CAN NOT FOR ANY REASON SHIP TO A US ADDRESS EVEN IF THE INTENTION IS TO FORWARD IT OUT OF THE US. NO EXCEPTIONS!!! ANYONE USING A US ADDRESS SHOULD PURCHASE THE US VERSION THAT IS LOCKED, OTHERWISE WE WILL CHANGE YOUR ORDER TO THE US VERSION!

Now includes three of the the original frequencies, along with the new 1258MHz frequency!  Must be used with a compatible receiver to be able to use the 1258 frequency (available here). Great quality video and no interference from 2.4GHz transmitters, wifi, or cellular! Not over-rated power output like most other available 1.3GHz transmitters.Typically better performance than 500mW 900MHz transmitters (because of lack of interference). Offers similar range to 2.4GHz 1000mW transmitters. 

Frequencies and DIP switch positions (1, 2):

**The "black boxes" on the unit indicate switch position.**

  • CH1: 1258 MHz  (OFF, OFF)
  • CH2: 1280 MHz (ON, OFF)
  • CH3: 1320 MHz (OFF, ON)
  • CH4: 1360 MHz (ON, ON)

Includes transmitter, cable with RCA audio/video and 2.1mm power barrel connector, and standard wire whip antenna.

  • Standard SMA connector
  • Power requirements: 12V, 500mA (3s lipo)
  • Weight: 30g (transmitter and antenna, no cables)
  • Dimensions: 300mw - Transmitter body - 49 x 25 x 7.5mm (60mm including SMA connector)

See the Cables and Connectors section for a selection of easy "ReadyMade" hookup solutions.

This cable can plug directly into the transmitter making connections EASY

Notice: The use and operation of this product in the USA and other countries may require an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.

Pinout-

The transmitter with the sma facing away from you;

  • Gnd
  • Audio
  • V+
  • Video
  • Model: V2-300MW1300MHZ-INTL
  • Shipping Weight: 0.2
  • 53 Units in Stock



Customers who bought this product also purchased...

RMRC - 900MHz 200mW Transmitter - INTL VERSION

RMRC - 900MHz 200mW Transmitter - INTL VERSION

Price:   $44.99
INTERNATIONAL VERSION, CANNOT SHIP TO A US ADDRESS UNDER ANY CIRCUMSTANCES Great quality video and no interference from 2.4GHz transmitters, wifi, or...
RMRC - 900MHz 200mW Transmitter - INTL VERSION

VAS - 900 MHz Vee Antenna

VAS - 900 MHz Vee Antenna

Price:   $13.95
This is perhaps the best general purpose antenna. Suitable for medium range and altitude, this antenna has lower isotropic gain (2.15-1.5) however...
VAS - 900 MHz Vee Antenna

NerdCam3D - Stereoscopic 3D FPV Camera

NerdCam3D - Stereoscopic 3D FPV Camera

Price:   $274.99
The NerdCam3D  is a unique board camera which creates a stereoscopic analog video signal (CVBS). Unlike other 3D-board cameras the...
NerdCam3D - Stereoscopic 3D FPV Camera

Tiger Motor MT2208-18 - KV 1100, 27.5mmm x 25mm, 45g

Tiger Motor MT2208-18 - KV 1100, 27.5mmm x 25mm, 45g

Price:   $43.90
High qualty motors from RC Tiger Motor! Specifications: ...
Tiger Motor MT2208-18 - KV 1100, 27.5mmm x 25mm, 45g

XT60 Male to 2.1mm Barrel Connector

XT60 Male to 2.1mm Barrel Connector

Price:   $3.49
A convenient way to power your video receiver or other devices that use a 2.1mm barrel connector.  A high quality 10cm pre-assembled connector...
XT60 Male to 2.1mm Barrel Connector

ToughBox H3 V2 - GoPro Hero 3 and FPV camera box

ToughBox H3 V2 - GoPro Hero 3 and FPV camera box

Price:   $44.99
RITEWING TOUGHBOX     The TOUGHBOX module is sleek and functional.  It securely holds your GoPro Hero 3 or Hero 2 in place...
ToughBox H3 V2 - GoPro Hero 3 and FPV camera box