1.3GHz Optimized 8dBi Patch Antenna - SMA Male

1.3GHz Optimized 8dBi Patch Antenna - SMA Male

1.3GHz Optimized 8dBi Patch Antenna - SMA Male

Retail Price: $46.99

 

NOTE: If they are out of stock, I can usually make more within a week!

This is the standard RE1208P antenna optimized by ReadyMadeRC to operate at peak efficiency for 1.3GHz (1280MHz).  The antenna element has been trimmed and the case has been re-sealed so it is still waterproof.  The original antenna's optimal frequency was measured to be 1160MHz. Original SWR at 1280MHz is around 6! (not at all optimal).  After the modifications, optimal frequency is 1280MHz with an SWR of 1 (exactly where it should be)!  Theoretically, the range of this antenna has been more than doubled compared to the unmodified version for those operating at 1280MHz. 
 
  • Superior performance
  • Light weight and only 8.5" x 8.5"
  • Durable UV-stable, UL flame rated radome
  • Low loss solid brass elements and 3 ft. coax lead
  • Can be installed for either vertical or horizontal polarization

Electrical Specifications (original antenna specifications prior to modification)

  • Frequency  1080-1200MHz*
  • Gain  8 dBi
  • Horizontal Beam Width  75 degrees
  • Vertical Beam Width  65 degrees
  • Impedance  50 Ohm 
  • Max. Input Power  25 Watts 
  • VSWR  < 1.5:1 avg.*

 


Mechanical Specifications

  • Weight  < 1 lb. (0.45 kg) 
  • Dimensions  8.5" x 8.5" x 1.2" (0.22 x 0.22 x 0.03 mm)
  • Shell Material  UV-inhibited Polymer
  • Flame Rating  UL 94HB
  • Mounting  Four ¼" Holes
  • Polarization  Horizontal or Vertical depending on orientation
  • Operating Temperature -40° C to 85° C (-40° F to 185° F)
  • Wind Survival  >150 MPH
  • RoHS Compliant  Yes

*Antenna is optimized for 1280MHz, which has shifted this range to be centered at that frequency.


Radiation Pattern:

 

  • Model: RE1208P-SM-OPTIMIZED
  • Shipping Weight: 1.3
  • 8 Units in Stock


Additional Images

1.3GHz Optimized 8dBi Patch Antenna - SMA Male
1.3GHz Optimized 8dBi Patch Antenna - SMA Male


Customers who bought this product also purchased...

CXN - FPV STATION TRIPOD MOUNT

CXN - FPV STATION TRIPOD MOUNT

Price:   $35.00
It can be used two different ways: One side is for your receivers, diversity and battery. The other  side is for your 7" to 12.1" FPV...
CXN - FPV STATION TRIPOD MOUNT

CONNEX ProSight - 2.8 mm Lens with built-in IR filter

CONNEX ProSight - 2.8 mm Lens with built-in IR filter

Price:   $14.99
Replacement 2.8mm lens for CONNEX Prosight Camera with IR filter
CONNEX ProSight - 2.8 mm Lens with built-in IR filter

Diversity Demon FPV Pro Race Edition

Diversity Demon FPV Pro Race Edition

Price:   $189.99
Diversity Demon is a FPV optimized video controller that is used to bridge three wireless video receivers together. Multiple receivers are used to...
Diversity Demon FPV Pro Race Edition

CONNEX ProSight - 1.4 mm Lens with built-in IR filter

CONNEX ProSight - 1.4 mm Lens with built-in IR filter

Price:   $24.99
Take your Connex HD FPV experience to the next level with the new 1.4mm HP+ lens. The new lens gives a wider field of view to accommodate...
CONNEX ProSight - 1.4 mm Lens with built-in IR filter

FR-Sky Taranis Q X7 - White

FR-Sky Taranis Q X7 - White

Price:   $104.99
The Q X7 transmitter includes a Haptic Vibration Feedback System which provides an alternative feedback system to the voice and sound alert warnings....
FR-Sky Taranis Q X7 - White

FrSky - X8R-PCB 8/16ch Telemetry Receiver

FrSky - X8R-PCB 8/16ch Telemetry Receiver

Price:   $34.99
SPECIFICATIONS Compatibility FrSky DFT/DJT/DHT/DHT-U in D_mode FrSky Taranis X9D/XJT in D8 mode...
FrSky - X8R-PCB 8/16ch Telemetry Receiver