Features:

• GAUI GU-INS supports X-type flying Quad-copter (GAUI 330X, 500X, etc…).
• Optional OSD (On-screen display, optional purchase module not included) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.
• Onboard USB interface connector for firmware updates.
• Interface provided to connect with standard receiver and JR satellite receiver.
• Easy to install and setup, no need of software on PC for adjustment.
• All functions can be setup & confirmed by LED lights indication.
• All in one design (combined inertial measurement unit and main controller) with simple cable wiring.

Specifications:

1. Dimensions:Main controller: 53.5 x 38.5 x 12mm
GPS antenna: 42 x 34 x 15mm
Weight:Main controller: 27g (w/o cables ), GPS antenna: 23g (with cable)
2. Frequency: 400Hz output to ESC
3. Operating temperature: -20~80°C
4. Operating modes: Rate (manual) mode, Auto balance mode, GPS positioning mode.
5. Rate (manual) mode: Max angular velocity: 300 degree/sec
6. Auto balance mode: Max tilt angle: 60 degree.
7. GPS positioning mode:
a. Hovering accuracy: Horizontal: ±1m, Vertical: ±0.5m
b. Max yaw angular velocity: 250 degree/sec
c. Max tilt angle: 45 degree.
d. Max horizontal speed: 10 m/s,36 km/hr
e. Max vertical speed: 8 m/s (horizontal posture)
8. GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
9. Fail-safe functions: Automatic Go-Home, Signal lost Go-Home, Low voltage protection.
10. Suitable wind condition: < 10 m/s