Eagle Eyes FPV Station with Plastic Case

Eagle Eyes FPV Station with Plastic Case

Eagle Eyes FPV Station with Plastic Case

Retail Price: $84.99

EagleEyesTM FPV Station

Shipments after May 8 2012 will now include a free hard case!
The EagleEyesTM FPV Station integrates the main components you need for FPV on the ground, at a cost that's lower than many of the individual units available!

Our new EagleEyesTM FPV Station provides all of the following features:

* Receiver Diversity - when you connect two NTSC or PAL audio/video receivers to it (of any frequency), the EagleEyesTM picks the better signal at any given time, which can greatly reduce video fades and improve your FPV experience! A variety of diversity settings are configurable with the on-board switches and LED indicators.
* Antenna Tracking - when coupled with our OSD Pro, the EagleEyesTM is the heart of a full-featured pan/tilt antenna tracker. Powerful, easy to use menus are provided for adjusting the EagleEyesTM to work flawlessly with the tracker of your choice. ReadyMadeRC.com produces a low cost, high quality tracker. The built-in regulator drives even large pan/tilt servos, with no need for an external BEC.
* Telemetry - When coupled with our OSD Pro, all Eagle Tree data (not just GPS position) are transmitted to your laptop, via your video transmitter and the EagleEyesTM USB port (separate USB cable required). Your flight can then be graphed and displayed with our powerful software, or visualized (either in real time or after your flight) with Google Earth!
* Four Channel A/V Distribution - Ever wish you had more video/audio outputs? The EagleEyesTM has four built-in outputs!
* Programmable Low Voltage Alarm - How is your ground station battery doing? Now you can program a low voltage alarm buzzer, which alerts you when your battery is below your chosen voltage. The buzzer can also be programmed to alert for other conditions, such as poor telemetry signal.

Here are the specifications:

* Two video inputs -NTSC/PAL, using your video receivers of any frequency. Video Input 2 is adjustable to match Video Input 1.
* Two audio inputs - Two monaural audio inputs are supported. Audio Input 2 is adjustable to match Audio Input 1.
* Four A/V outputs - Four video outputs (75 ohm) and four "line level" audio outputs
* Power Input - Power input range approximately 6V to 14V. Barrel style power input with standard 2.1mm center pin.
* Two Servo Outputs for pan and tilt trackers - Unit is capabable of delivering 5A burst output to drive even large pan/tilt servos.
* USB Port for connecting to PC, for live PC display of telemetry and firmware update. Note: A standard USB "Mini-B" cable required for these features, but not included.
* Encasement - Heavy duty clear heatshrink

Here is a video demonstration of the tracking function of the EagleEyes FPV Station, with the ReadyMadeRC.com pan/tilt tracker.

 

  • Model: EAGLE-EYES
  • Shipping Weight: 0.6
  • Only 1 left


Additional Images

Eagle Eyes FPV Station with Plastic Case


Customers who bought this product also purchased...

DAL Prop - Tri Blade 4045 V2 Bullnose (2CW,2CCW) - Blue

DAL Prop - Tri Blade 4045 V2 Bullnose (2CW,2CCW) - Blue

Price:   $1.99
DALPROP T4045 V2 Quad-Blades CW CCW Propeller for Micro QuadCopter Multicopter Inner diameter (Prop...
DAL Prop - Tri Blade 4045 V2 Bullnose (2CW,2CCW) - Blue

Direct Drive HQ Prop - Glass Fiber - 8X5 Black (Bullnose)

Direct Drive HQ Prop - Glass Fiber - 8X5 Black (Bullnose)

Price:   $4.40  $0.99 Save: 78% off
Contains 2 Direct Drive "Bull Nose" props.  Hub Diameter: 5mm (Spacers for 3, 4, 5mm)
Direct Drive HQ Prop - Glass Fiber - 8X5 Black (Bullnose)

VAS 900 MHz BAZOOKA DIPOLE

VAS 900 MHz BAZOOKA DIPOLE

Price:   $14.95
VAS 900 MHz antenna Package Includes: 1x Antenna
VAS 900 MHz BAZOOKA DIPOLE

40mm PE Black Heat Shrink - 1M

40mm PE Black Heat Shrink - 1M

Price:   $2.85
Premium PE heat shrink in 1 meter sections. Specifications Size: ~41.5mm Diameter After heat is applied: ~21 - 39mm Wall thickness after heat: ~1.0mm
40mm PE Black Heat Shrink - 1M

50mm PE Black Heat Shrink - 1M

50mm PE Black Heat Shrink - 1M

Price:   $3.10
Premium PE heat shrink in 1 meter sections. Specifications Size: ~51mm Diameter After heat is applied: ~26 - 49mm Wall thickness after heat: ~1.0mm
50mm PE Black Heat Shrink - 1M

XH Balance Port Extender for 2s Batteries - 20cm

XH Balance Port Extender for 2s Batteries - 20cm

Price:   $1.09
Use this XH balance port extender to improve the length of other wise short balance boards when charging. It can also be used in FPV applications...
XH Balance Port Extender for 2s Batteries - 20cm