STRIX ALATUS - FPV Racing Wing - KIT

STRIX ALATUS - FPV Racing Wing - KIT

STRIX ALATUS - FPV Racing Wing - KIT

Retail Price: $104.99

Introducing the STRIX ALATUS! After a year of testing and prototyping, we are proud to be able to finally bring this ultra fast and simple to build plane to you! Are you tired of spending the time and hassle to cover your wings with laminate only to crash it later? So were we! The ALATUS is made from high density, molded EPO foam. On top of that, we have used an 8mm, square spar as well as additional spars in front and behind. All of this means that you can spend more time in the air than with your covering iron and still have an ultra stiff and responsive wing. 

Crash your wing? No problem! The ALATUS can change a broken wing in about 30 seconds. Simply pop the canopy off, unplug the servo from your receiver, and slide out the damaged wing. 

No skimping out on the electronics. For the PNP version of the ALATUS, we have included 9g digital metal gear servos along with quality hardware. The 60A ESC is capable of 2-6s power and has custom right angle motor bullets to save space in the fuselage. It also features a powerful, switch mode BEC to ensure ample power during tough maneuvers. The included STRIX 2217 2300Kv motor has plenty of power to get the ALATUS moving and is made by Cobra Motor. 

FPV Ready! The ALATUS was designed to use the RMRC Cricket 200 and 600mw transmitters with aluminum case. They bolt directly into the canopy and with a 90* SMA connector, the antenna goes directly out of the top. The channel list and button is still easy to see and operate. Any camera with a metal bracket (STRIX Ochi, HS1177) bolts right into the top of the canopy for easy camera installation. We have even included a guide to keep those pesky wires in their place. The 60A ESC also comes with an additional JST power tap pre-installed to power your transmitter. 

Race Ready! The Alatus has been approved for racing in MultiGP events in its stock form as well as FPVWRA events in the Sport Class. For other events that require 40" wing span or less, we have included cut lines on the wings as well as coroplast winglets. 

Features

  • Simple to build
  • Easily replaceable wings
  • High density EPO foam
  • Extra wing reinforcement
  • Durable fuselage
  • 60A 2-6s ESC with XT60 and JST (PNP Only)
  • STRIX 2217 2300Kv Motor by Cobra (PNP Only)
  • Flight Controller Ready
  • Designed for use with RMRC Cricket 200 and 600mw transmitters

Specifications

  • ​Wingspan: 1092mm, 43" (1016mm, 40" when cut for use with winglets)
  • Weight
    • KIT: ~550g
    • PNP: ~700g
  • Top Speed: 99+ (PNP)
  • Battery: 1500 - 2200 4s
  • ​Battery Bay: 130mm Length x 40mm Wide x ~32mm Tall (Approximate available room)
  • Motor Mount: 16x19mm & 19x25mm

KIT Includes

  • ALATUS Wing and Fuselage (wing halves are pre-glued)
  • 2x Optional Winglets
  • ​Decal Sheet
  • Gemfan 6x4 APC Style Propeller
  • Does not include any electronics (some are shown in pictures for demonstration)

Recommended Equipment

RC Groups.com Alatus Thread

  • Model: STX-160027
  • Shipping Weight: 4.25
  • In Stock


Additional Images

STRIX ALATUS - FPV Racing Wing - KIT
STRIX ALATUS - FPV Racing Wing - KIT
STRIX ALATUS - FPV Racing Wing - KIT

STRIX ALATUS - FPV Racing Wing - KIT
STRIX ALATUS - FPV Racing Wing - KIT
STRIX ALATUS - FPV Racing Wing - KIT

STRIX ALATUS - FPV Racing Wing - KIT
STRIX ALATUS - FPV Racing Wing - KIT
STRIX ALATUS - FPV Racing Wing - KIT

STRIX ALATUS - FPV Racing Wing - KIT
STRIX ALATUS - FPV Racing Wing - KIT
STRIX ALATUS - FPV Racing Wing - KIT


Customers who bought this product also purchased...

STRIX StratoSurfer - KIT

STRIX StratoSurfer - KIT

Price:   $104.99
Introducing the STRIX StratoSurfer!  This awesome aircraft is intended to be a short to medium range and fun to...
STRIX StratoSurfer - KIT

STRIX StratoSurfer - Replacement Main Wing Set

STRIX StratoSurfer - Replacement Main Wing Set

Price:   $57.99
Replacement Main Wing Set for the Strix Stratosurfer Package Includes 1x Left wing 1x Right wing 1x Hardware for wings  
STRIX StratoSurfer - Replacement Main Wing Set

STRIX StratoSurfer - Replacement Tail Wing Set

STRIX StratoSurfer - Replacement Tail Wing Set

Price:   $34.99
Replacement Tail Wing Set for the Strix Stratosurfer Package includes 1x Tail wing set 1x Tail wing hardware
STRIX StratoSurfer - Replacement Tail Wing Set

STRIX StratoSurfer - Replacement Fuselage

STRIX StratoSurfer - Replacement Fuselage

Price:   $69.42
Replacement fuselage for the Strix Stratosurfer ​ Package includes 1x Main fuselage
STRIX StratoSurfer - Replacement Fuselage

Penguin V2 Wing Set

Penguin V2 Wing Set

Price:   $45.99
Penguin Wing Set. Includes main wings with pre-installed reinforcement tubes and servo extensions and wood bases for servo arms. Also includes V2...
Penguin V2 Wing Set

STRIX StratoSurfer - Replacement Canopy & Motor Pod

STRIX StratoSurfer - Replacement Canopy & Motor Pod

Price:   $35.99
Replacement Canopy & Motor Pod for the Strix Stratosurfer Package Includes 1x Motor Pod 1x Canopy  1x Hadware pack for motor pod &...
STRIX StratoSurfer - Replacement Canopy & Motor Pod