CONNEX Falcore - Any Battery Plate KIT

CONNEX Falcore - Any Battery Plate KIT

CONNEX Falcore - Any Battery Plate KIT

Retail Price: $15.00

Includes

  • 5X Battery Plate
  • 4X O Ring
  • 2X Antenna Saver Straws

Battery Specifications

  • 4S
  • XT60 Connector
  • Dimensions:
    • Max thickness: 1.1” (28mm)
    • Max length: 4.3” (110mm)
  • High C rating is recommended

Examples of suitable batteries

  • TATTU 1800mAh 4S 75C
  • RMRC Orange Series - 1500mAh 4S 70C Lipo - XT60 (22.2Wh) (link to product)

Use instructions

  1. Attach the battery adapter to the top of the LiPo battery.
  2. Insert the battery with the adapter into the drone until the tabs on the sides of the adapter click into the slots on the sides of the drone
  3. To power the drone, plug the XT60 connector into the socket at the back of the drone

Caution: Risk of serious injury - DO NOT plug the battery into the drone before thoroughly reading the
Falcore Quick Guide.

 Note: Inserting a non-Falcore battery without this adapter will damage the drone's internal    electronic components.

Flying with a damaged plate or a plate that was printed using unsuitable materials may also cause internal damage during a crash!

  • Model: AMN810903
  • Shipping Weight: 0.159
  • Only 10 left


Additional Images

CONNEX Falcore - Any Battery Plate KIT