EAGLE TREE MICRO VECTOR FLIGHT CONTROLLER + OSD

EAGLE TREE MICRO VECTOR FLIGHT CONTROLLER + OSD

EAGLE TREE MICRO VECTOR FLIGHT CONTROLLER + OSD

Retail Price: $99.95

Whether you’re into FPV racing, freestyling, or serious camshipping, the MicroVector (µV) integrated Flight Controller and OSD should be perfect for your small FPV mulitrotor or fixed wing model! 

Why you need the µV:

Easy Configuration

  • Fully set up and tune your µV three convenient ways:
  • Windows GUI
  • OSD stick menus at the field
  • Optional InfoPanel LCD 

Built-in wizards to make setting up even easier

Features

  • Built in OSD with COLOR GRAPHICS and fully customizable screens
  • Programmable video power control: Turn on/off your video camera and/or video transmitter using a radio switch, on arm/disarm, etc.
  • SkyGates Virtual Racing (Experimental Augmented Reality, Optional GPS required)
  • Built in Flight Data Recorder/data logger helps take out the guesswork if something goes wrong

Performance

  • Fast 32 bit microcontroller
  • DMA enhanced control loop running at up to 8 kHz
  • Advanced PID and filter tuning from either the GUI, or stick menus at the field
  • Oneshot and Multishot ESC Protocols

Compatibility

  • Standard 30.5mm mounting hole centers
  • PWM, SPPM, Spektrum Satellite and S-BUS Receivers supported, with 4 types of RSSI
  • BLHeli ESC configuration via the µV USB port
  • Compatible with most PDBs, including those with built in current sensors (or use our PSU)
  • Multirotor airframes: Racing Quadcopter, Standard Quadcopter, Tricopter, Y6, Hexacopter
  • Fixed wing airframes: Traditional, Elevon, V-tail

Specifications

Supported Airframes:

  • Traditional fixed wing, Elevon, and V-tail planes
  • Racing Quadcopter, Quadcopter, Tricopter, Hexacopter and Y6 multirotors

Recommended Airframes: the MicroVector is not recommended for large or heavy airframes, due to no or limited testing on these types of models at this time. Examples: giant scale fixed wing models, turbines, or multirotors larger than 650mm are not recommended.

Video formats:

  • composite NTSC and PAL (autodetect)

Size/Mass of Main Unit

  • Size (approx): 38 X 38 X 10 mm with case, 36 x 36 x 7 mm without case
  • Mass (approx): 13 grams with case, 7 grams without case

What's Included

  • µV with plastic case (4 screws)
  • Set of 5 rugged "pigtail" cables for precise installation

A full list of features and specifications can be found here

  • Model: MICROVECTOR
  • Shipping Weight: 0.068
  • 15 Units in Stock


Additional Images

EAGLE TREE MICRO VECTOR FLIGHT CONTROLLER + OSD


Customers who bought this product also purchased...

Vector Current Sensor (PSU) - Deans Connectors

Vector Current Sensor (PSU) - Deans Connectors

Price:   $33.99
Replacement Vector Current Sensor/PSU.  NOTE: this sensor is compatible ONLY with the Vector Flight Controller + OSD.
Vector Current Sensor (PSU) - Deans Connectors

AIMDROIX Blackbird 250 - 5" Prop G10 Arm

AIMDROIX Blackbird 250 - 5" Prop G10 Arm

Price:   $13.99
5in props G10 arms kit Allows to install 5in props. Kit includes: 4x, 5in prop 5mm arms.  
AIMDROIX Blackbird 250 - 5" Prop G10 Arm

RMRC Non-Slip Silicone Battery Strap - 20mm x 250mm (2PCS)

RMRC Non-Slip Silicone Battery Strap - 20mm x 250mm (2PCS)

Price:   $3.49
RMRC Battery Straps! 250mm total in length including buckle 20mm wide Allows for tight and secure battery mounting Includes silicone,...
RMRC Non-Slip Silicone Battery Strap - 20mm x 250mm (2PCS)

RMRC Non-Slip Silicone Battery Strap - 20mm x 300mm (2PCS)

RMRC Non-Slip Silicone Battery Strap - 20mm x 300mm (2PCS)

Price:   $3.99
RMRC Battery Straps! 300mm total in length including buckle 20mm wide Allows for tight and secure battery mounting Includes silicone,...
RMRC Non-Slip Silicone Battery Strap - 20mm x 300mm (2PCS)

Direct Drive HQ Prop - Glass Fiber - 5x4.5x3R Black (Bullnose)

Direct Drive HQ Prop - Glass Fiber - 5x4.5x3R Black (Bullnose)

Price:   $1.68  $1.26 Save: 25% off
Contains 2 Direct Drive Props 5mm Hub
Direct Drive HQ Prop - Glass Fiber - 5x4.5x3R Black (Bullnose)

HQ Quad Prop 5X4X4V1S Black (2CW+2CCW)-Glass Fiber

HQ Quad Prop 5X4X4V1S Black (2CW+2CCW)-Glass Fiber

Price:   $3.99
Contains  2CW Prop 2CCW Prop Specifications Standard, 5mm Hub 7.2mm Hub Thickness
HQ Quad Prop 5X4X4V1S Black (2CW+2CCW)-Glass Fiber