Acro Naze 32 - Flight Controller Rev 6

Acro Naze 32 - Flight Controller Rev 6

Acro Naze 32 - Flight Controller Rev 6

Retail Price: $23.49

*****REVISION (6b) ******

This version does not include pins. You must source your own below, or direct solder your servo leads to the board itself. 

Important Notes:

  • To ensure driver compatibility, please connect the board via USB before soldering any pins to the board. A good source for drivers that seem to be compatible with the software are Silicon Labs CP210x USB to UART Bridge VCP Drivers, which can be found HERE
  • Returns cannot be accepted for poor soldering and bad connections.  
  • Using this hardware with anything other than supplied "baseflight" firmware will immediately make the end user ineligible for any kind of support or warranty through the manufacturer.
  • NAZE boards can vary in color from batch to batch. We cannot guarantee which color you will receive.

Be sure to use the BaseFlight software to update and make changes. Click here to download.

This is the Acro version of the Naze32 and does not include Barometer or Magnetometer! (Includes Accelerometer & Gyro)

  • STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
  • Invensense MPU6050 MEMS accelerometer + gyro
  • Built-in Micro-USB for programming/firmware update
  • 36x36mm size, ~5 gram weight w/o headers
  • Made in JAPAN

No headers included.

  • User manual found HERE.
  • Configuration software found HERE. (Chrome)

Need Pin Headers?

RMRC Black Box SD Recorder

This flight controller can be paired with the RMRC Prints FrSky D4R-II / X4R Antenna Holder & Naze Platform for an incredibly clean & tidy setup.
  • Model: ACRO-NAZE32-NO-PINS
  • Shipping Weight: 0.02
  • Backorder


To be notified when this product is back in stock please click here.


Additional Images

Acro Naze 32 - Flight Controller Rev 6
Acro Naze 32 - Flight Controller Rev 6
Acro Naze 32 - Flight Controller Rev 6


Customers who bought this product also purchased...

Foxeer - 5.8 SMA Mini Version Omni Antenna (RHCP) - Black

Foxeer - 5.8 SMA Mini Version Omni Antenna (RHCP) - Black

Price:   $8.00
Description: Mini versin of FOXEER 5.8G...
Foxeer - 5.8 SMA Mini Version Omni Antenna (RHCP) - Black

EMAX RS2205 Replacement Bearing - 1pc

EMAX RS2205 Replacement Bearing - 1pc

Price:   $1.99
Replacement motor bearing for Emax Red Bottom Motors
EMAX RS2205 Replacement Bearing - 1pc

RMRC - Nano Skyhunter - Black Fuselage Protector

RMRC - Nano Skyhunter - Black Fuselage Protector

Price:   $4.99
Protect your Nano Skyhunter and keep it looking like new! Use Foam-Tac or Welder glue for best results (not CA). For best adhesion, we recommend...
RMRC - Nano Skyhunter - Black Fuselage Protector

DAL Prop - Cyclone Series T5045C - Crystal Orange

DAL Prop - Cyclone Series T5045C - Crystal Orange

Price:   $2.99
Description: Dalprop high-end CYCLONE series, features faster reaction, easier cornering and less noise, excellent aerodynamics design make it...
DAL Prop - Cyclone Series T5045C - Crystal Orange

RMRC Silver Line - BR2205H 2600kv - CW Thread/CCW Rotation

RMRC Silver Line - BR2205H 2600kv - CW Thread/CCW Rotation

Price:   $10.49
CW Thread / CCW Rotation (1 PC) "Righty Tighty" Introducing the RMRC Silver Line! These motors are both economical and powerful. They feature N52...
RMRC Silver Line - BR2205H 2600kv - CW Thread/CCW Rotation

STRIX TALON PROPS - 5x4.2x3 (1R, 1L) - Cherry

STRIX TALON PROPS - 5x4.2x3 (1R, 1L) - Cherry

Price:   $1.49
Sold in Pairs 1 right, 1 left Talon Overview Power up, and take your position.  Goggles down, thumbs up.  Pilots arm your quads.  We...
STRIX TALON PROPS - 5x4.2x3 (1R, 1L) - Cherry

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “Acro Naze 32 - Flight Controller Rev 6” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!