BrainFPV RE-1 Baro Sensor

BrainFPV RE-1 Baro Sensor

BrainFPV RE-1 Baro Sensor

Retail Price: $8.99

MORE CONTROL
NAVIGATE WITH EASE

  • Display the altitude in the OSD to always know how high you are
  • Use the altitude-hold flight mode
  • Go all out and combine it with a GPS and an I2C compass to make RE1 fully navigation capable (position hold, loiter, return-to-home, waypoints).

EASY AND EXTENDABLE

DESIGNED FOR YOU

BrainFPV made RE1 to be extendable and added an extension port with high speed interfaces (SPI, I2C), as well as general purpose signals.

RE1-Baro is the first add-on for RE1 that makes use of the extension port and so can directly stacked on top of RE1 without any wiring, making it easy to use and keeping your build neat and clean.

Installation

1: Place the spacers and foam.

2: Position the add-on and craefully press down with your finger.
You will hear a "click" when the connector mates.

3: Use the screws to hold the add-on in place. Done :).

Enable the Barometer

Depending on whether you use dRonin or Betaflight, different steps are needed to enable the barometer. 

  • dRonin: Under "Hardware" in the dRonin GCS set "I2CExtBaro" to "BMP280".  Click "Save" and reboot RE1.
  • Betaflight: In the Betaflight configurator in the "Configuration" tab, enable "Barometer" (under "System Configuration"). Then click on "Save and Reboot". Note: the barometer is only supported in Betaflight version v3.0.1-BRAIN-2 and newer.
  • Model: RE1-Baro
  • Shipping Weight: 0.011
  • 0 Units in Stock


To be notified when this product is back in stock please click here.


Additional Images

BrainFPV RE-1 Baro Sensor


Customers who bought this product also purchased...

RotorX RX2535 2.5 Quad Blade Propellers - Smoke Black

RotorX RX2535 2.5 Quad Blade Propellers - Smoke Black

Price:   $7.98
2.5" quad-blade propellers. Interlocking hub means you can switch them to dual or quad blade with only a few screws. These props are very...
RotorX RX2535 2.5 Quad Blade Propellers - Smoke Black

Blade - Inductrix FPV Prop Set (4), Yellow (BLH8506)

Blade - Inductrix FPV Prop Set (4), Yellow (BLH8506)

Price:   $5.99
Replacement Prop Set for the Blade Inductrix FPV
Blade - Inductrix FPV Prop Set (4), Yellow (BLH8506)

Inductrix CF Motor Reinforcement Plate

Inductrix CF Motor Reinforcement Plate

Price:   $3.99
Tired of breaking the plastic frames on your Inductrix? This is the perfect product to make your plastic frames last a lot longer! The...
Inductrix CF Motor Reinforcement Plate

Tattu 220mAh 1S 45C Lipo Pack - 5 Pack (Wh 0.814)

Tattu 220mAh 1S 45C Lipo Pack - 5 Pack (Wh 0.814)

Price:   $23.99
Tattu 220mAh 3.7V 45C 1S1P Lipo Battery Pack with Eflite Stock / Ultra Micro Connector. Tattu Tiny whoop lipo,best battery choice for winter...
Tattu 220mAh 1S 45C Lipo Pack - 5 Pack (Wh 0.814)

RakonHeli 3 Blade Clear Propeller (2CW,2CCW) - Blue

RakonHeli 3 Blade Clear Propeller (2CW,2CCW) - Blue

Price:   $4.99
1. Description:  Product material: Clear Plastic Diameter: 31mm Inner diameter: for 0.8mm Shaft Height: 7.2mm Weight (2CW+2CCW): 1.00(g) =...
RakonHeli 3 Blade Clear Propeller (2CW,2CCW) - Blue

Gemfan PC Propeller - 5 x 5 x 3 Black (Bullnose)

Gemfan PC Propeller - 5 x 5 x 3 Black (Bullnose)

Price:   $2.59
Gemfan PC Bullnose Propellers  Includes 2L & 2R props 5mm Hub
Gemfan PC Propeller - 5 x 5 x 3 Black (Bullnose)

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “BrainFPV RE-1 Baro Sensor” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!