Pro Camera Pan and Tilt Kit

Pro Camera Pan and Tilt Kit

Pro Camera Pan and Tilt Kit

Retail Price: Starting at: $34.99

This is the new carbon reinforced plastic pan/tilt FPV module that uses a custom mechanism allowing for full 180 degree (+/- 90 degree) panning with a standard servo without the need for a servo stretcher.  A full 360 degree pan (+/- 180 degrees) is possible with the use of an extended travel servo or an NG Hobbies SSV3.5 servo stretcher (option below).  Rather than supporting the weight of the camera on the weak servo connection, the pan is mounted to a super-durable metal mechanism rotating on precision bearings.

The modules are supplied with options for various servos servos depending on your budget or requirements.

Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation.

The module can be attached to the plane of your choice with four screws. Dimensions listed below in the pictures.

The included camera mounts includes extended screws for a solid mount of all the "full size" Ready Made RC, LLC  cameras, including the RMRC-420, RMRC-480, RMRC-540, RMRC-600XV, RMRC-700XV.  It includes a pop out rear panel for the cameras with built in on screen controls. 

Smaller cameras may be mounted using double sided adhesive foam tape (not included).  Some cameras not listed above may require modifications to the camera mount.  We hope to add additional camera brackets soo!

Note: Currently the back plates are designed for the pan/tilt system being installed on top of the aircraft.  If you plan on mounting the assembly inverted under the aircraft, some modifications to the back plate may be required.

This kit includes:

  • Precision laser cut fiber reinforced components and required gears, bearings, and other hardware for pan/tilt module.
  • Two 9g Servos  (default option)

Note: for the "no servo" option, it is up to the customer to modify the assembly if required.  The system was designed for the servos listed in the options below.  Any other servo must be aligned properly for proper gear engagement.

You'll need to supply:

  • Zip-ties to hold for holding your wiring in place.
  • Medium CA
  • 5 minute epoxy

Manual: Pro Pan/Tilt Module


  • Model: PRO-PANTILTKIT
  • Shipping Weight: 0.3
  • 3 Units in Stock

Please Choose:



Misc Options





Order in the next 11hrs 47min and it ships today!

Additional Images

Pro Camera Pan and Tilt Kit


Customers who bought this product also purchased...

VAS CLOVERLEAF MICRO RHCP NO SMA CONNECTOR

VAS CLOVERLEAF MICRO RHCP NO SMA CONNECTOR

Price:   $12.00
FPV's most popular antenna. The Cloverleaf antenna by iBCrazy took the FPV world by storm in 2011. Spawning copy after...
VAS CLOVERLEAF MICRO RHCP NO SMA CONNECTOR

Iftron - PassPort 5.8 Diversity Receiver

Iftron - PassPort 5.8 Diversity Receiver

Price:   $399.99  $189.99 Save: 53% off
The new PassPort 5.8 Diversity Receiver is very small, very slim and decidedly very sexy. Yet it is very big on performance! Measuring only...
Iftron - PassPort 5.8 Diversity Receiver

VAS-5.8 GHZ 16 TURN HELICAL (SUPER CANNON) (LHCP) V2

VAS-5.8 GHZ 16 TURN HELICAL (SUPER CANNON) (LHCP) V2

Price:   $34.95
For insane range on 5.8GHz!  (It's best to be using an antenna tracker with this antenna. 15.5dBic Gain Frequency range: 5200-6200Mhz...
VAS-5.8 GHZ 16 TURN HELICAL (SUPER CANNON) (LHCP) V2

RMRC Professional Series Tools - Full Set

RMRC Professional Series Tools - Full Set

Price:   $129.99
Save some money and buy the full set! ($141.95 if purchased separately) Be the envy of your pilot friends with the new RMRC tool sets!  We...
RMRC Professional Series Tools - Full Set

2mm PE Black Heat Shrink - 1M

2mm PE Black Heat Shrink - 1M

Price:   $0.99
Premium PE heat shrink in 1 meter sections. Specifications Size: ~2.3mm Diameter After heat is applied: ~1.1 - 1.8mm Wall thickness after heat:...
2mm PE Black Heat Shrink - 1M

4mm PE Black Heat Shrink - 1M

4mm PE Black Heat Shrink - 1M

Price:   $1.10
Premium PE heat shrink in 1 meter sections. Specifications Size: ~4.3mm Diameter After heat is applied: ~2.1 - 3.6mm Wall thickness after heat:...
4mm PE Black Heat Shrink - 1M