Custom RMRC FPV Package - 2.3-2.4 GHz

Custom RMRC FPV Package - 2.3-2.4 GHz

Custom RMRC FPV Package - 2.3-2.4 GHz

Retail Price: Starting at: $254.99

Using the new line of Ready Made RC 2.3/2.4 GHz transmitters and receivers, this package allows you to pick and choose some of the major components. It starts with everything you need to get started with flying in the 2.3/2.4 GHz band with the exception of your viewing device. Add an RMRC LCD screen or goggles and you're ready to go!

Available Channels:

  • d:2305
  • E:2396
  • 0:2410
  • 1:2430

Lower channels will be less likely to run into interference from 2.4GHz Wifi or other pilots using 2.4GHz for RC control. 

Package starts with the following components:

This FPV setup (when no options are chosen) would cost $287 if purchased separately! 

  • NOTE: We do not advise using a 2.4 GHz radio with this starter package. Please look into using a 433 UHF long range system or possibly 72MHz to avoid potential loss of signal. 
  • NOTE: If you purchase the "no camera" option, the transmitter will only come with the "stock" cable and does not include the custom ReadyMadeRC cable used for attaching it to the rest of the Ready Made RC cables or transmitter battery. 
  • If you choose a monitor as an option, it will come with a power Y adapter and barrel connector for powering the monitor from batteries with JST connectors.  We recommend 1100mAh or larger batteries if using this configuration because of the power draw. You will need hook and loop tape or some other material to attach the battery and/or your receiver to the monitor if you wish to do that.

Instructions: HERE

*Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.  ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.  Frequencies not allowed in the US will be disabled for those items shipped to US addresses.

  • Model: 2.3-2.4GHZCUSTOM
  • Shipping Weight: 1.2
  • 1416 Units in Stock

Please Choose:
















Additional Images

Custom RMRC FPV Package - 2.3-2.4 GHz


Customers who bought this product also purchased...

CXN - FPV STATION TRIPOD MOUNT

CXN - FPV STATION TRIPOD MOUNT

Price:   $35.00
It can be used two different ways: One side is for your receivers, diversity and battery. The other  side is for your 7" to 12.1" FPV...
CXN - FPV STATION TRIPOD MOUNT

RMRC Cricket - Runcam HD2 Micro USB Camera Cable

RMRC Cricket - Runcam HD2 Micro USB Camera Cable

Price:   $5.99
RMRC Cricket to Micro USB - Works with Runcam HD2 and others.  15cm camera cable 10cm JST power cable
RMRC Cricket - Runcam HD2 Micro USB Camera Cable

GoProHD Tilt Kit

GoProHD Tilt Kit

Price:   $43.99  $37.39 Save: 15% off
Finally, a way to record in high definition while flying FPV! I've designed a tilt assembly that holds the GoProHD camera allowing for the...
GoProHD Tilt Kit

Pixhawk II - Here GNSS (M8N) GPS Unit

Pixhawk II - Here GNSS (M8N) GPS Unit

Price:   $57.99  $48.00 Save: 17% off
Contains Here GNSS * 1 GPS1 port connector for connecting Here GNSS to PH2 * 1 Highlights Concurrent reception of up to 3 GNSS (GPS,...
Pixhawk II - Here GNSS (M8N) GPS Unit

Carbon Fiber Flat Strip: 4mm x 1mm, 1m Long

Carbon Fiber Flat Strip: 4mm x 1mm, 1m Long

Price:   $1.99
Great for reinforcing wings, these carbon fiber bars can be inserted into foam wings by just slicing into the wing with a hobby knife and gluing them...
Carbon Fiber Flat Strip: 4mm x 1mm, 1m Long

Carbon Fiber Tube: 4mm x 2.5mm, 1m Long

Carbon Fiber Tube: 4mm x 2.5mm, 1m Long

Price:   $2.49
Great for reinforcing wings and tails, these hollow carbon fiber tubes can be used as additional spars. If you do not want to create an extra...
Carbon Fiber Tube: 4mm x 2.5mm, 1m Long