Flyduino - KISS ESC 2-5S 24A Race Edition - 32bit (4 Pack)

Flyduino - KISS ESC 2-5S 24A Race Edition - 32bit (4 Pack)

Flyduino - KISS ESC 2-5S 24A Race Edition - 32bit (4 Pack)

Retail Price: $107.99  $85.99 Save: 20% off

From Flyduino:

KISS ESC 24A RE 
In the sense  of our KISS ESC line this ESC offers a great compatibility to a wide range of motors, the work of years went in to making the best possible here.
The fast, 32bit Arm Cortex CPU does a very good job and runs the ESC very effective, of course reaction times are top notch.
The 24 RE is laid out as a beefy ESC which  withstand quite some abuse due to FPV races, several mechanisms doing its best to protect your valuable equipment, the rating of 24A wont need direct cooling, mounting them partially covered is ok.

No need to worry with different firmware, simply solder and fly (some solder skills are the only needed skills).
First ESC with with oneshot42 support (dont worry, Oneshot125 and  normal PWM are auto detected too).
Beside this, this is the first ESC who offer a easy to use telemetry function over the regular servo connector which you can use in combination with our KISS-FC, no external heavy parts needed anymore to have info like voltage, amps and even your RPM on your OSD (MinimOSD supported) or on your receiver LCD screen (Frsky-Taranis, f.e.).

Of course these ESC can be used like any regular ESC, you just need to solder wires to them.

Included:

  • 4x KISS ESC 24A RE assembled board


Specifications:

  • 32-bit ARM Cortex MCU @ 48Mhz
  • Telemetry capability (current, voltage and speed / RPM will be covered by the ESC itself and to compatible devices such as our KISS FC forwarded)
  • Over current protection (measures the current and limited active at 30A)
  • Fast reacting over temperature protection (reducing the gas when exceeding 120 ° C (reduces the power, not simply shutting down the unit)
  • Advanced Auto Timing (3.25 to 30 ° are at each engine step readjusted, unique to the 32bit Kiss ESC line)
  • For Race Multicopter Developed (24A continuous without direct cooling *)
  • High max. Speed ??(450.000ERpm, 64.000Rpm at a 14POL Motor)
  • Small dimensions (19 x 27 mm)
  • fine speed control (about 950 steps, real resolution)
  • no external ElKo (electrolytic capacitor) necessary **
  • fast reacting gas changes
  • linear throttle response
  • Active freewheeling enabled (little diode losses resulting in higher efficiency)
  • regenerative braking, thereby rapid throttle response at deceleration (the ESC uses active freewheeling and regenerative braking, 2 independent features which relates to each other in different working states)
  • Fast switching FET by the use of gate drivers
  • minimal dead times by an adaptive dead time
  • 2-5S LiPo capable **
  • Oneshot42, Oneshot125 and normal (25 - 500Hz) PWM is detected automatically.

Made in Europe

This Device is ESD sensitive, take precautions in any way, this is no "your coffee is hot warning", its physics we can't avoid, the smaller electronic becomes, the more ESD sensitive it is.

Read the Wiki section for Electrostatic Discharge before soldering.

Manual

special features (not needed for regular use!)

  • Model: PR1941-4PK
  • Shipping Weight: 0.037
  • 0 Units in Stock


To be notified when this product is back in stock please click here.


Additional Images

Flyduino - KISS ESC 2-5S 24A Race Edition - 32bit (4 Pack)


Customers who bought this product also purchased...

GoPro Camera Tethers

GoPro Camera Tethers

Price:   $19.99  $4.99 Save: 75% off
Use these camera tethers and adhesive anchors to further secure your GoPro camera in extreme conditions. The tethers attach to the camera...
GoPro Camera Tethers

Hook & Loop Tape with Adhesive Backing - BLACK (75mm x 1m)

Hook & Loop Tape with Adhesive Backing - BLACK (75mm x 1m)

Price:   $3.59
1 Meter x 75mm Hook and Loop tape with Adhesive Backing (Black) Polyester   
Hook & Loop Tape with Adhesive Backing - BLACK (75mm x 1m)

RMRC Mantis - 5.8GHz Video Receiver with Race Band - 40 Channels

RMRC Mantis - 5.8GHz Video Receiver with Race Band - 40 Channels

Price:   $44.99
Introducing the RMRC Mantis Receiver! Small size, BIG performance! Race Ready The Mantis comes with Race Band (R) so you can race with up to 8...
RMRC Mantis - 5.8GHz Video Receiver with Race Band - 40 Channels

STRIX Power Stix 1s HV Charging Board - Up to 6 HV Packs at Once

STRIX Power Stix 1s HV Charging Board - Up to 6 HV Packs at Once

Price:   $19.99
You asked for it and we listened! Introducing the Strix Power Stix HV Portable Carging Board for charging 1s Batteries! Features...
STRIX Power Stix 1s HV Charging Board - Up to 6 HV Packs at Once

TPU Motor Mount - 1MM - Red

TPU Motor Mount - 1MM - Red

Price:   $5.49
With all the talk about soft mounting and vibration issues with flight controllers and now talk of soft mounting motors, we wanted to give people an...
TPU Motor Mount - 1MM - Red

40mm PE Black Heat Shrink - 1M

40mm PE Black Heat Shrink - 1M

Price:   $2.85
Premium PE heat shrink in 1 meter sections. Specifications Size: ~41.5mm Diameter After heat is applied: ~21 - 39mm Wall thickness after heat: ~1.0mm
40mm PE Black Heat Shrink - 1M

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “Flyduino - KISS ESC 2-5S 24A Race Edition - 32bit (4 Pack)” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!