The CXN 3-axis FPV Camera gimbal is designed to give you a more realistic FPV flight, using of a 3D
headtracker or gimbal stabilization controller (not included) you can have a more realistic FPV flight by keeping the FPV camera image stabilized always looking forward, you can also bypass the stabilization and have a 3 axis pan/tilt camera mount.
In quads, when you go forward at high speeds your FPV camera is pointing to the ground. With this
gimbal you can now look straight forward, make hard rolls, etc. without getting you dizzy.
In planes when you take a dive the camera stays stabilized giving you a more real feel and look.
This gimbal can be used as a 2 or 3 axis. It requires (2) micro servos for ROLL/PITCH and (1)
standard servo for PAN. Required servos are the EMAX - ES08MA II - Metal Gear Servo or the EMAX-ES08AII.
A standard servo plate is available for custom plane installations.
For testing "Videos" a KK2.0 LCD board was used with Open Aero firmware in Camera Stabilization Mode.