FrSky - XJT JR/Graupner Style D8/D16 16ch Duplex Module
by FrSky

The XJT telemetry transmitter module fits JR style modules, including the FRSky X9D, Horus X10 or X10S, and the 2019 versions of the X9D radios. This will allow you to run in D8 mode in addition to standard D16 mode.

Features up to 16 channels and s-port for duplex communications with X series receivers. (Only certain transmitters are capable of sending 16 channels to the XJT, which include FRSky Radios.)

Compatible with both the V8, D, LR and X Series (telemetry) receivers from FrSky.

You can also add the XJT to the back of your FrSky Taranis transmitter for 32 channel in totals when running in D16 mode!

Features:

• Advanced Continuous Channel Shifting Technology (ACCST SYSTEM) achieves highly reliable link in interference rich environments.
• Smart Port (s-port) - Full Duplex communication
• Easy to bind and instant link-up
• Excellent reboot times
• All channels failsafe
• Quick response
• Very smooth servo movement
• Alarm on events of receiver (low battery voltages, poor reception, etc.)
• Error-free link, by using 48bits CRC algorithm
• Firmware upgradable

SPECIFICATIONS

• Operating Voltage: 6~15 VDC
• Operating Current: 140mA (@6V), 80mA (@12V)
• Output Power:≤ 100mW (FCC Certified)
• Module Slot: JR/Graupner Type
• Modulations: PXX or CPPM (auto‐detected)
• Modes: D8, D16 or LR12 (selectable)
• Telemetry Interface: Smart Port, RS232 Serial Port
• Upgrade Interface: Smart Port, RS232 Serial Port

Note: The XJT module must be plugged in an Frsky radio and set the channel range to CH1-16 in the menus before installing on the JR9303 TX bay. JR9303 will output all of its channels to X8R receive 1-8 PWM ports/slots.

Firmware, manual, and other related downloads HERE.