HobbyWing LED Program Card for Flyfun & Skywalker ESC
by HobbyWing

This program card is used to set the programmable parameters of brushless ESCs. It has a user friendly interface to make setting the programmable parameters very easy. Conveniently pocket-sized so you can easily bring it to the racing or flying field.

This program card is used to program the non-V5 FLYFUN (6A, 10A, 12AE, and 18A only) & SKYWALKER Series of brushless airplane ESCs (also compatible with Suppo brand HW Series ESCs). Not compatible with Suppo yellow wrapper ESCs. (Note: FLYFUN was formerly called "Fentium").

This program card is NOT suitable for Platinum Series or FlyFun V5 airplane ESC.

Specifications:

1.1 Size: 92mm (L) * 52mm (W) * 6mm (H).
1.2 Weight: 26g.
1.3 Input Voltage: 4.8-6V

(If the ESC does not have a built-in BEC, an additional battery is required to supply the program card)

Progamming Options:

• 1. Brake on/off
• 2. Battery type
• 3. Cut off type
• 4. Cut off Voltage
• 5. Start Mode
• 6. Timing Mode
• 7. Music Lipo-cells
• 8. Governer Mode