Penguin V2 Kit (We found one!)
by Finwing Hobby

We found one of these blasts from the pasts in the warehouse. Combined from a few kits that had parts scavenged, this is a full original kit! Get it before it's gone!

Penguin Kit (Airframe Only) 

• Wingspan:   1720MM/67.7inch
• Length: 1230MM/48.5inch
• Wing Area: 36dm/3.9ft2 (Mainwing Area)
• Motor: Brushless motor M2220 Kv1350 or M2815 KV1280
• ESC:  40A for M2220 or 60A for M2815
• Servo: 3pcs 17g servo+ 1pcs 9g servo. 
• Battery: Li-Po 11.1V 2400 mAh for M2220 and  5000mAh for M2815 recommended
• ARF Weight:   0.98kg/34.6oz.ARF is the weight including almost ready to fly, not including battery and your extra FPV devices
• Static Thrust:  Motor M2220 1.5Kg/53.0oz.
•                        Motor M2815 1.95kg/69oz,
• Max.flight weight more than 2.2kg/77.0oz
• Payload:        600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight)
• Material:        EPO Wing and fuselage/ Wooden rib reinforcement/ aluminum alloy Pipe/Carbon Fiber pipe

Options include: (Options no longer offered...it's been a while...)

Motor/ESC:

• No motor/ESC
• Finwing M2210 Motor with 40A linear BEC ESC
• Finwing M2880 Motor with 60A switch mode BEC ESC
• Custom ReadyMadeRC Penguin Power Package with Himax Motor and 50A TB ICE ESC (very minor modifications required of the wood motor mount to allow motor shaft to spin freely)

Servos:

• No Servos Included
• Stock Finwing 3pcs 17g servo+ 1pcs 9g servo
• Hitec Servo Package: 3 HS81, 1 HS65HB servo
• Hitec Metal Gear Servo Package: 3 HS82 MG, 1 HS65MG Servo

Great review of the V1 Penguin on Model Aiplane News!

Forum Discussions:

RCGroups

FPVLAB

WANT A CAMERA PAN/TILT SYSTEM? Our pan/tilt units will drop right in to our version of the Penguin using the included wood base mount.  There are a few choices sold separately:

• Standard Pan/Tilt
• Pro Pan/Tilt
• Basic Pan/Tilt
• GoPro Pan/Tilt

FinwingHobby Universeye Penguin Kit 

Part No: FUP1202 Penguin Kit

• Pre-assembled EPO Mainwing
• EPO fuselage,Horizontal wing and Vertical Wing
• Propeller 9060 1PCS
• All Aluminum and wooden reinforcement parts has been included
• Magic Velcro and foam glue

  Finwing Penguin Features:

• The first FPV specific airplane design with rolling takeoff capabilities
• Large fuselage space for lots of equipment!
• Transparent canopy design allowing you to protect your FPV camera from the weather while offering a crystal clear view.
• FPV Camera on top,  and camera opening on the bottom of the fuselage (optional plastic dome available for bottom). Great for aerial photography, you can place a high definition camera on the bottom pointing down, or an HD camera can be mounted on the outside of the canopy for a clear view forward.
• Front gear and tail gear design, runway take off and landing available.  Ground handling great with just rudder control.
• Metal servo horns and strong hardware for strong and stable flight control
• Large battery mounting aread with hook and loop tape, plus side hook and loop mounts for easy equipment mounting.
• Designed with great premade positions to place your GPS, video transmitter, radio transmitter
• Rear mounted propeller is out of view and protected from those "rough" landings.

 Airplane flight video please visit:     www.youtube.com/user/Finwingtube

More high definition photos visit:    www.flicker.com/photos/finwing

​Penguin User Manual