Now includes the original 1280MHz, along with the new 1258MHz frequencies! Must be used with a compatible receiver to be able to use the 1258 frequency (available here).
High quality 1.5W 1300MHz transmitter. Not the cheap copies available on eBay and from other overseas sources. Power output verified to be true 1.5W.
Comes with heat sink as shown, which can be removed to give you a VERY lightweight system. Requires airflow if not using the heat sink case.
Cable available for easy connection to OSD's and other devices here!
Note: Systems sold in US will have 1258MHz and 1280MHz only.
Pinout- (With the transmitter with the SMA connector facing away from you)
This equipment is being sold under the FCC’s amateur radio rules. Operators must abide by all applicable laws and hold an amateur license to operate this equipment. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. For information regarding obtaining an amateur radio license, please go to http://www.arrl.org/getting-licensed.
47 CFR 97.215(c) sets a 1 watt limit for amateur devices being used for telecommand. Devices over 1 watt output should not be used for telecommand of model aircraft.
The use and operation of this product in your country may require an amateur radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the purchase and use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.