Introducing the RMRC Cricket V2 series of video transmitters!
What's New In the Cricket V2
Changing Frequency Band and Channel
With the Cricket you can easily change out your transmitter or channel at the races without having to cram for space depending on the rules. Of course, the Cricket comes with Race Band (E) so you can race with up to 8 pilots when using alternating Right and Left hand polarized antennas. If you are a club that is looking to buy multiple units, we offer bulk pricing at the bottom of the page.
High Quality Case
The 600 and 200mW Crickets feature a beautiful, blue anodized aluminum case that is both light weight and durable for the most epic of crashes. All 4 sides of the SMA connector are supported by the case to lessen the chance of damage. Screw tabs and a flat surface makes these units extremely easy to mount. The Cricket also as a small foot print at only 33x24x10mm including the case! For those that need to save weight and don't need the extra power, the 25mW version is available without the case.
One of our favorite features is the built-in microphone. Now you can stop worrying about adding external mics or relying on your cameras built-in version to give you important audio feedback while racing. This means one less wire that needs to be used and a cleaner wiring harness.
Stay Legal with all 40 channels
The RMRC Cricket transmitters feature 40* channels that are all legal to use in the USA with an amateur radio license. The same cannot be said for many other 5.8Ghz transmitters being sold that transmit at/above 5925MHz and at/below 5650MHz. The Cricket also includes the "Race Band" that was first pioneered by ImmersionRC.
Not just another re-branded product
Although they look similar to other FPV transmitters on the market, we've put some RMRC "special sauce" into the Crickets. Most importantly, the 200mW transmitters will TRULY meet 200mW on most channels. Plus, our 5V output actually holds closer to 5V under load while the others drop to as low as 4.4V based on our testing.
Please double check your wires before powering your camera! Not all cameras use the same pin-out.
Need a receiver? Check out the RMRC Mantis!
600mW shown for pictures only
This equipment is being sold under the FCC’s amateur radio rules. Operators must abide by all applicable laws and hold an amateur license to operate this equipment. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. For information regarding obtaining an amateur radio license, please go to http://www.arrl.org/getting-licensed.
47 CFR 97.215(c) sets a 1 watt limit for amateur devices being used for telecommand. Devices over 1 watt output should not be used for telecommand of model aircraft.
The use and operation of this product in your country may require an amateur radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the purchase and use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.