RMRC Recruit V2 - EPP Wing - Pro Build with FPV - PNP
by RMRC

This version of the Recruit comes to you ready for FPV fun! Contact us through our support channels to customize your equipment!

It assembles in seconds and best of all, with ZERO glue required. Simply plug in your receiver to the pre-installed gyro that is already tuned to give you the best flight experience possible. The durable Black EPP foam is crash proven by best of the "Dumb Thumb Crew" at RMRC. 

If you are a multirotor pilot who is getting started on the other side of the hobby, you are sure to recognize the 2206 2300kv motor. We have also made sure that the multirotor popular HD camera, the GoPro Session, fits perfectly into the nose. The power button is also easy to press right through the foam.

If you like to travel with your planes, in addition to the removable wings, the Recruit's winglets are dismantled with only 2 screws!

Features

• Durable EPP foam
• Tuned gyro with 2 flight modes: 3D and Stabilized
• Multirotor style, 2206 motor
• Nose mounting options for HD cameras
• Side mount position for FPV camera
• Easy to remove wings and winglets

Specifications

• Wingspan: 900mm
• Length: 482mm
• Foam: EPP
• Motor: 2206 2300kv
• Propeller: 3 Blade 5x4.5
• ESC: 3s-4s 30A with 5v/1A BEC, XT60
• HD Camera Options:
  • GoPro Session 4/5
  • Runcam HD 1/2/3
  • Yi-Cam
  • GoPro Hero 4 (5 can fit with modification)
  • Foxeer Legend

Note: If using without an HD camera we do not recommend flipping the wood tray. This part is glued in well at this time and damage may occur to the plate. The best method for attaching the battery is a larger piece of hook-n-loop on the plate and attach the battery to that only.

Includes

• Recruit Pro Build PNP PNP
• Installed Runcam Swift II
• Installed RMRC Cricket Pro V2
• Installed STRIX Hoot RHCP Antenna
• Installed Stabilizer
• Installed ESC, Motor, Servos
• Propeller

Needed to Complete

• Simple assembly
• 4 Channel Transmitter/ with standard PWM Receiver
• 3s 2200-2400mAH Battery with XT60

Gyro Settings

• There is no need to set up your radio with wing mixing. The gyro does this automatically.
• Solid Blue LED: Full stabilized/Takeoff mode
• Flashing Red LED: Stabilizer off (Not available on RTF Radio)
• Solid Red LED: Acro Mode (Allows loops and rolls, but stabilized)
• Note: If you need to switch back into Full stabilized/Takeoff mode, please do so at less than 10% throttle. Otherwise, the gyro will lift the elevons as if it were taking off again. 

Note: If you wish to add FPV gear, we recommend adding a separate BEC to power your equipment.