WALKSNAIL Avatar HD Kit - Camera, Transmitter, Antennas
by WALKSNAIL
$159.00
Notify me when this is in stockPREORDER
- Brand: WALKSNAIL
- Model: WN03-6014S
- RMRC Win: 85046
- Shipping Weight: 0.15
- Country of Origin: CN
- Copy Referral Link
This product requires an amateur radio license to operate legally in the US. Please read the Amateur Radio Info before purchasing
WALKSNAIL Avatar HD Nano Kit - Camera, Transmitter, Antennas
The FPV Community's digital System!
Highlights:
- 19mm*19mm camera with 1080P HD resolution
- The Avatar video transmitter was designed with single board, is super easy to install, and weights only 16g. The VTX uses H.265 code which is the leading technology in the market, and provides 1080p HD FPV image quality and 22ms ultra-low latency when in high frame rate mode. It also supports canvas mode and distance detection with dual-antenna, which meets most of the requirements of FPV community.
- The Avatar vtx comes with 8Gb built-in storage and can record 1080p or 720p HD flight videos onboard without any interference.
- Supports betaflight and inav full OSD display in Canvas Mode, so you can easily adjust the parameters you want by remote control.
Specifications:
Camera:
- Model: Avatar Camera
- Image Sensor: 1/2.7 inch
- Resolution: 1080p/60fps, 720p/120fps, 720p/60fps
- Image Ratio: 16:9 and 4:3
- Lens: 2.1mm
- Field of View: 170 degrees
- Aperture: F2.0
- Shutter: Rolling Shutter
- Minimum Illumination: 0.001 LUX
- Weight: 6g
- Dimensions: 19x19x22mm
- Coaxial Cable: 90mm/140mm
Video Transmitter
- Model: Avatar Module
- Communication Frequency: 5.725-5.850GHz (US Amateur Radio Legal)
- Transmitter Power (EIRP): FCC: <30dBm: CE: <14dBm: SRRC: <20dBm; MIC: <25dBm
- I/O Interface: JST1.0*6(Power in) JST1.0*4(USB)
- Mounting Holes: 25.5x25.5mm
- Dimensions: 33x33x9.5mm
- Storage: 8Gb
- Recording: 1080p/720p
- Weight: 16g
- Operating Temperature: -20-40C
- Channels: 8
- Power Input: 6v-25.2V
- Supported FC System: Betaflight
- OSD: Canvas Mode
- Latency: Average Delay 22ms
- Antenna: 2(IPEX)
VTX Antenna
- Model: Polar Antenna
- Polarization: LHCP
- Bandwidth: 5.6GHz-5.9GHz
- Average Gain: 2dBic
- Radiation Efficiency: >= 98%
- VSWR: <=1.4
- Connector: U.Fl
- Line Length: 90mm
- Dimensions: H105mmxR11.2mm
- Weight: 1.5g
| Name | Value |
|---|---|
| MANUFACTURER | WALKSNAIL |
| BAND | 5.8GHz |
Fat Shark Dominator HD Digital FPV Goggles Avatar HDO3
Related Products
US Customers:
This equipment is being sold under the FCC’s amateur radio rules. Operators must abide by all applicable laws and hold an amateur license to operate this equipment. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. For information regarding obtaining an amateur radio license, please go to http://www.arrl.org/getting-licensed.
47 CFR 97.215(c) sets a 1 watt limit for amateur devices being used for telecommand. Devices over 1 watt output should not be used for telecommand of model aircraft.
International Customers:
The use and operation of this product in your country may require an amateur radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the purchase and use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.
Also ordered with:
FAST SHIPPING FROM OHIO
109 Innovation Ct Ste C, Delaware, OH 43015, United States | +1(740)-936-4500