SpeedyBee F7 V3 Stack F722 FC + 50A 128K ESC | 30x30
by Speedybee

The SpeedyBee F7 V3 Stack is an ultra-capable flight system designed for demanding FPV pilots. It combines the SpeedyBee F722 flight controller with a powerful 50A 128K BLHeli_32 ESC in a robust 30x30 mounting configuration. This stack is packed with advanced features including a BMP280 barometer, 500MB onboard Blackbox, FC LiPo voltage monitoring, and CNC heat sink shielding for reliable heat dissipation in high-performance setups. With 8 motor outputs, it’s an ideal choice for X8 Cinelifters, freestyle quads, racers, or long-range drones.

Compatible with Betaflight, INAV, and Emuflight, the F7 V3 supports configuration and firmware flashing via WiFi or BLE. It also integrates a DJI Air Unit plug and multiple UARTs, making it extremely versatile for both analog and digital builds.

Specifications:

SpeedyBee F7 V3 Flight Controller

• MCU: STM32F722

• Gyro: BMI270

• Barometer: BMP280

• Blackbox: 500MB onboard memory

• OSD: AT7456E chip (Betaflight OSD)

• Power Input: 3S–6S LiPo

• 5V Output: 10 outputs (2A total)

• 9V Output: 2 outputs (4A total)

• 3.3V Output: 1 output (500mA)

• USB: Type-C

• BLE & WiFi support for configuration and flashing

• UARTs: 5 (UART1, 2, 3, 4, 6)

• DJI Plug: Included

• ESC Signal Pads: M1–M8

• Buzzer Pads: Yes (BZ+ / BZ-)

• Mounting: 30.5x30.5mm, M4 holes (with M3 grommets)

• Dimensions: 41x38x8.1mm

• Weight: 9g

• Target: SPEEDYBEEF7V3

• Firmware: Betaflight (default), Emuflight, INAV

SpeedyBee 50A 128K ESC

• Firmware: SpeedyBee BL32 50A

• Continuous Current: 50A x 4

• Burst Current: 55A (5s)

• Input Voltage: 3S–6S LiPo

• PWM Frequency: 128KHz

• Current Sensor: Supported (Scale = 490, Offset = 0)

• Power Output: VBAT

• Dimensions: 45.6x40x8.8mm

• Mounting: 30.5x30.5mm, M4 holes (with M3 grommets)

• Weight: 19.2g (with heatsink)

What’s Included:

• 1x SpeedyBee F7 V3 Flight Controller

• 1x SpeedyBee 50A BLHeli_32 ESC

• 1x 35V 1500uF Low ESR Capacitor

• 1x SH 1.0mm 8-Pin Cable (30mm)

• 1x XT60 Power Cable

• 5x M3 8mm Silicone Grommets

• 5x M3 8.1mm Silicone Grommets

• 5x M3 Silicone O-Rings

• 1x DJI 6-Pin Cable (80mm)

• 1x 4-Pin SH1.0 to SH1.0 VTX Cable (60mm)

• 1x 4-Pin SH1.0 to JST1.25 3+2-Pin FPV Cam Cable (30mm)

• 1x 4-Pin SH1.0 to JST1.25 3+2-Pin FPV Cam Cable (60mm)

• 1x 4-Pin SH1.0 to JST1.25 4-Pin FPV Cam Cable (60mm)

• 1x 6-Pin SH1.0 GPS Cable (with connector)

• 1x 6-Pin SH1.0 GPS Cable (without connector, 100mm)

• 1x 4-Pin SH1.0 Radio Receiver Cable (100mm)