Unlock the full potential of your FPV system with the Walksnail Avatar Repeater, the first HD digital video transmission repeater designed to boost signal strength, expand range, and reduce interference for smoother and more reliable flights. Featuring dual-band 5.2GHz and 5.8GHz high-power transmission, it is equipped with high-gain LHCP directional antennas (7dBi avg.) to amplify signals in challenging environments such as long-range flying, film production, or remote landscape photography.
The repeater supports 1080p/100fps, 1080p/60fps, 720p/100fps, and 720p/60fps transmission resolutions via the Avatar HD system, maintaining sharp, low-latency visuals over extended distances. Its built-in hardware filter minimizes adjacent channel interference for stable video feeds. Simple 4-step pairing makes setup quick and reliable.
Compatible with Walksnail Goggles X, Avatar VRX, and all current Walksnail VTX systems, this repeater is a must-have tool for pilots looking to increase performance in both recreational and professional FPV operations. Power input is flexible with support for 9V–26V, allowing for seamless integration with drone ground stations or mobile setups.
Specifications:
System: Avatar HD System
Power Input: 9V–26V
Dimensions: 119.5 × 72 × 18.6 mm
Weight: 145.9g (antenna not included)
I/O Interface: USB, 4-Pin 1.0mm Port
Transmission Resolutions:
1080p @ 100fps, 60fps
720p @ 100fps, 60fps
Communication Frequencies:
5.15–5.30GHz (5.2G)
5.50–5.85GHz (5.8G)
Transmitter Power (EIRP):
FCC: <30dBm
CE: <14dBm
SRRC: <20dBm
MIC: <25dBm
5.2G Antenna:
Gain: 7dBi (avg)
Polarization: LHCP
5.8G Antenna:
Gain: 7dBi (avg)
Polarization: LHCP
Name | Value |
---|---|
MANUFACTURER | WALKSNAIL |
FREQUENCY BAND | 5.8 Ghz |
GOGGLES MODULE? | No |
US Customers:
This equipment is being sold under the FCC’s amateur radio rules. Operators must abide by all applicable laws and hold an amateur license to operate this equipment. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. For information regarding obtaining an amateur radio license, please go to http://www.arrl.org/getting-licensed.
47 CFR 97.215(c) sets a 1 watt limit for amateur devices being used for telecommand. Devices over 1 watt output should not be used for telecommand of model aircraft.
International Customers:
The use and operation of this product in your country may require an amateur radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the purchase and use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.