NewBeeDrone BeeID v1.1 M10Q GPS Module with RemoteID & Drone Tracker
by NewBeeDrone

The NewBeeDrone BeeID v1.1 M10Q GPS Module with RemoteID & Drone Tracker is an innovative, multi-functional aviation accessory that goes far beyond standard regulatory compliance. Engineered for FPV freestyle, long-range exploration, and commercial sUAS operations, this incredibly compact module combines three essential trackside utilities into a single, featherlight package: a high-fidelity M10Q GNSS navigation receiver, a fully certified FAA-compliant broadcast Remote ID transmitter, and a local hardware locator beacon. By integrating these systems onto a single board, pilots can avoid adding multiple clunky components to their custom drone stacks.

At the core of its navigation performance is the advanced 10th-generation u-blox M10Q chipset coupled with a high-gain ceramic patch antenna. Featuring a 72-channel parallel tracking engine, the module supports concurrent reception across major global satellite constellations—including GPS, GLONASS, and GALILEO—delivering rapid cold start lock times and rock-solid 3D coordinate accuracy required for reliable flight controller GPS Rescue and autonomous operations. For pilots flying craft over 250 grams in FAA-regulated airspaces, the module integrates a compliant Remote ID transmitter alongside a built-in barometer used strictly for broadcast altitude reporting. For recovery, the module embeds a dedicated Bluetooth Low Energy (BLE) tracker beacon. If your quad goes down and loses video or control link, the beacon continuously transmits a signal up to 150 meters away, allowing you to trace the drone's exact location on a map via free smartphone apps like Drone Scanner.

Technical Specifications

• GPS Module Engine: 10th Gen u-blox M10Q Chipset

• Concurrent Constellations: GPS L1, GLONASS L1, GALILEO E1

• Parallel Receiving Channels: 72 Channels

• Default Interface Bitrate: 115200 bps (Standard UART Output)

• Wireless Connectivity Array: Integrated Wi-Fi (for parameter configuration) & Bluetooth Low Energy / BLE (for tracking and RemoteID broadcasting)

• Integrated Sensor Hardware: Built-in Barometer (utilized exclusively for FAA broadcast altitude reporting)

• Antenna Architecture: High-Gain Active Ceramic GPS Antenna

• Operational Speed Accuracy: 0.05 m/s

• Maximum Dynamic Altitude Characteristic: 50,000 meters

• Input Supply Voltage: Standard 5V DC (Sourced via flight controller pad)

• Physical Enclosure Dimensions: 22 mm x 15.6 mm x 8 mm

• Net Hardware Weight: 5.2 grams

• Operating Temperature Limits: -40°C to +85°C

• Firmware Compatibility: Natively supports Betaflight, iNAV, Ardupilot, and PX4 Autopilot ecosystems

What's Included

• 1 x NewBeeDrone BeeID v1.1 M10Q GPS Module with RemoteID & Drone Tracker

• 1 x Silicone Pre-wired JST Interface Cable Harness