TBS Chupito (KIT) - FPV Flying Wing
by Team Black Sheep

Product Description

The TBS Chupito Kit is a compact, high-performance FPV flying wing designed for freestyle flying, casual long-range exploration, and high-speed aerial adventures. Inspired by the TBS Mojito, the Chupito delivers an accessible, easy-to-fly platform with impressive speed, responsive handling, and a travel-friendly design. Its 31.5-inch (80 cm) wingspan makes it an excellent choice for FPV pilots looking for a portable fixed-wing aircraft that offers exceptional performance without the size and complexity of larger flying wings.

Built from durable black EPP foam, the TBS Chupito features reinforced wing spars, fiberglass camera and motor mounts, and oversized pushrods for added strength. Pre-cut compartments simplify installation of your servos, battery, receiver, and FPV equipment, while the push-to-open electronics bay provides convenient access to onboard components. The wing can be assembled in a travel-friendly, three-piece configuration or permanently glued together for a more rugged setup.

Despite its compact size, the Chupito offers an impressive flight envelope. With a recommended 6S 1300mAh LiPo battery, pilots can expect approximately 20 minutes of casual flight time, a cruising speed around 70 km/h, and a stock-setup top speed of up to 160 km/h. With the appropriate power system, propeller, and airframe preparation, the Chupito is capable of even higher speeds. Its spacious battery compartment also supports configurations designed for extended-range missions.

The TBS Chupito supports a wide range of FPV equipment, including DJI O3, DJI O4, Walksnail Avatar HD, and analog video systems. It is compatible with TBS Crossfire Nano receivers and can be configured with an INAV flight controller for autonomous navigation features and enhanced flight control.

Whether you're looking for a compact long-range FPV wing, a portable fixed-wing platform for traveling, or a nimble aircraft for high-speed FPV flying, the TBS Chupito Kit delivers an exciting combination of portability, durability, and performance.

Please note: This is an assembly kit, not a ready-to-fly aircraft. Assembly is required, and servos, motor, ESC, propeller, battery, radio receiver, FPV equipment, and other electronics are sold separately unless purchased as part of a separate bundle.

Features

• Compact 31.5-inch (80 cm) forward-swept FPV flying wing

• Easy-to-fly design inspired by the TBS Mojito

• Durable black EPP foam construction

• Carbon fiber wing spars and fiberglass camera and motor mounts

• Pre-cut slots for servos, battery, receiver, antennas, and FPV electronics

• Convenient push-to-open electronics compartment

• Removable three-piece configuration for transport or permanent assembly for rugged flying

• Designed for analog and digital FPV video systems

• Compatible with DJI O3, DJI O4, Walksnail Avatar HD, and analog FPV equipment

• Supports 4S–6S LiPo batteries

• Approximately 20 minutes of casual flight time with a recommended 6S 1300mAh battery

• Stock-setup top speed of up to 160 km/h, depending on configuration

• Suitable for freestyle, high-speed flying, and long-range FPV missions

Specifications

• Product: TBS Chupito Kit

• Aircraft Type: Forward-swept FPV flying wing

• Wingspan: 31.5 in (80 cm)

• Airframe Material: Black EPP foam

• Reinforcement: Carbon fiber spars

• Camera and Motor Mounts: Fiberglass

• All-Up Weight: Approximately 650 g (23 oz) or more, depending on equipment

• Battery Compatibility: 4S–6S LiPo

• Recommended Battery: 6S 1300mAh

• Recommended Battery Capacity Range: 800–1800mAh 6S

• Maximum Battery Weight: 270 g

• Recommended Maximum Battery Dimensions: 50 × 50 × 150 mm

• Typical Cruise Speed: Approximately 70 km/h

• Stock-Setup Maximum Speed: Up to 160 km/h

• Potential Maximum Speed: Up to 230 km/h with suitable propeller selection and wing lamination

• Typical Flight Time: Approximately 20 minutes

• Advertised Endurance: Up to 30 km (18 miles), depending on setup and flight conditions

• FPV System Compatibility: DJI O3, DJI O4, Walksnail Avatar HD, analog FPV

• Radio Receiver Compatibility: TBS Crossfire Nano RX and Crossfire Nano RX Pro

• Flight Controller Compatibility: Suitable for INAV configurations

• Assembly: Required

Package Includes

• 1 × TBS Chupito flying wing kit

• 1 × TBS Chupito sticker sheet

• Carbon fiber wing spars

• Fiberglass motor and camera mounts

• Metal hardware