The BrotherHobby Avenger V3 2812 1115KV Brushless Motor is a lightweight, high-efficiency outrunner propulsion motor engineered for 8-inch to 9-inch long-range FPV cruisers, mountain surfing rigs, and medium-lift cinelifters. Built around a 2812 stator (28mm diameter by 12mm height) in a 12N14P electromagnetic configuration, the Avenger V3 combines ultra-thin 0.2mm Kawasaki silicon steel laminations with N52H curved arc magnets to maximize magnetic flux density, throttle linearity, and thermal efficiency across sustained long-distance flights.
CNC-machined from high-strength 7075 aluminum alloy for both the bell cap and base housing, the motor pairs a weight-saving hollow titanium alloy shaft with oversized 12x6x4mm Japanese NMB ball bearings to deliver smooth, low-vibration rotation under heavy propeller loads. Rated for 5S to 8S LiPo power systems and capable of producing up to 3.5 kg of peak thrust, this 1115KV winding provides punchy throttle authority on 8-inch and 9-inch propellers while keeping all-up weight down at just 76.5 grams including factory-installed 25cm 18AWG silicone leads.
High-Output 1115KV 2812 Stator Design: 28mm × 12mm stator built with 0.2mm Kawasaki silicon steel laminations in a 12N14P pole layout delivers crisp throttle response and up to 3.5 kg of peak thrust for 8-inch and 9-inch long-range platforms.
7075 Aircraft-Grade Aluminum Bell & Base: CNC-machined Al 7075 bell cap and base casing resist impact deformation while maximizing airflow cooling across extended climbs.
Hollow Titanium Alloy Shaft: Reduces rotating mass without sacrificing structural rigidity, improving acceleration and crash durability.
Oversized Japanese NMB Bearings: Dual 12mm × 6mm × 4mm Japanese NMB ball bearings support high radial and axial loads for smooth, quiet, gyro-clean operation.
High-Temperature N52H Curved Arc Magnets: Precision-curved N52H neodymium magnets maintain tight air-gap tolerances and resist demagnetization under sustained high-current operation.
Extended 25cm 18AWG Silicone Leads: Pre-soldered 250mm 18AWG high-strand silicone wires reach central 4-in-1 ESCs or arm-mounted single ESCs on 8"–10" frames without wire splicing.
Brand / Manufacturer: BrotherHobby
Model Identifier: Avenger 2812 V3 Motor (1115KV, CW)
KV Rating: 1115KV
Stator Size: 2812 (28.0 mm diameter × 12.0 mm height)
Configuration: 12N14P (12 Stator Slots / 14 Rotor Poles)
Input Voltage / Cell Count: 5S – 8S LiPo
Peak Bench Thrust: Up to ~3,500 g (3.5 kg) per motor
Stator Laminations: 0.2 mm Kawasaki Silicon Steel
Rotor Magnets: N52H Curved Arc Magnets
Bell Cap & Base Casing Material: CNC-Machined 7075 Aluminum Alloy
Shaft Material & Design: Titanium Alloy Hollow Shaft
Propeller Adapter Shaft Thread: M5 (5.0 mm CW Thread)
Bearings: Japanese NMB Ball Bearings (12.0 mm × 6.0 mm × 4.0 mm)
Mounting Bolt Pattern: 19.0 mm × 19.0 mm (M3 Threaded Holes)
Motor Lead Wires: 18AWG Silicone Wire (SR), 250 mm (25 cm) Length
Net Weight: 76.5 grams (including 25cm 18AWG wires)
Recommended Propeller Size: 8-inch to 9-inch Propellers (up to 10-inch low-pitch setups)
Target Applications: 8"–9" Long-Range FPV Drones, Mountain Cruisers, Cinelifters, and Macro Freestyle Multirotors
(1) BrotherHobby Avenger V3 2812 1115KV Brushless Motor (with 25cm 18AWG Silicone Wires)
(1) M5 Flanged Aluminum Propeller Locknut
(4) M3 Motor Mounting Screws
| Name | Value |
|---|---|
| MANUFACTURER | Brother Hobby |
| STATOR DIAMETER | 28 |
| STATOR HEIGHT | 12 |
| KV | 1115 |
| THREAD DIRECTION | Standard |
| SHAFT FOR COLLET MOUNT | no |