GEPRC MATEN 5.8G 2.5W VTX PRO Analog Video Transmitter - INTERNATIONAL
by GepRC

IMPORTANT: RMRC WILL NOT SHIP INTERNATIONAL TRANSMITTERS TO USA ADDRESSES. (INCLUDING FREIGHT FORWARDERS WITH A USA ADDRESS) Orders made to a USA address will have the item removed from the order and a store credit issued to the account while any remaining items from the order shipped.

Maximize your analog FPV range and signal penetration with the GEPRC MATEN 5.8G 2.5W VTX PRO Analog Video Transmitter in an upgraded Silver finish. Purpose-built for long-range exploration, high-speed bando freestyle, and commercial sUAS tracking, this ultra-high-power transmitter packs an impressive 2500mW max output into a compact footprint. It offers six adjustable power levels—ranging from a crisp Pit Mode up to its full 2.5W peak authority—enabling operators to fine-tune energy consumption and RF output to match specific mission parameters. Operating over a wide multi-channel spectrum with direct frequency configuration entry, this video transmitter effortlessly cuts through thick environmental barriers, multipath interference, and localized band crowding to deliver a locked-in, low-latency video feed.

Engineering heavy-duty power requires exceptional thermal architecture. The MATEN 2.5W PRO Silver features a rugged, CNC-machined high-strength aluminum alloy casing optimized for enhanced heat dissipation, coupled with an active built-in micro turbofan to prevent thermal throttling before launch. Flight security is tightly maintained by a dynamic temperature control circuit that automatically steps down transmission output if critical thermal thresholds are breached. For total piloting immersion, an integrated ambient microphone streams live audio directly back to the ground station. Outfitted with dual-format 20x20mm and 30.5x30.5mm mounting options and an MMCX antenna port, this versatile 20-gram VTX supports IRC Tramp OSD protocol configuration and wide 2S to 8S LiPo power inputs, making it an ideal choice for custom drone customizers, aerospace robotics teams, and tactical UAV systems.

Operational Safety Warning: Always securely mount a high-gain antenna prior to powering on the transmitter. Operating this high-output VTX without a load or sufficient cross-airflow can trigger immediate heat build-up and permanent hardware damage. The on-board 5V output is strictly rated for low-draw camera or external auxiliary fan power supply.

Technical Specifications

• Model Designation: GEPRC MATEN 5.8G 2.5W VTX PRO (Silver Edition)

• RF Output Power Options: Pit Mode / 25mW / 200mW / 600mW / 1600mW / 2500mW

• Frequency Tuning Range: Wideband Spectrum (4884 – 6184 MHz)

• Channel Infrastructure: Up to 80CH Support (Allows direct manual frequency input via configurator)

• Input Power Voltage Envelope: DC 7.0V – 36.0V (Supports 2S to 8S LiPo Battery Configurations)

• Onboard BEC Output Power: DC 5V @ 600mA Max (Dedicated for FPV camera or secondary fan lines)

• Control Protocol Integration: IRC Tramp Protocol (OSD parameter adjustment support)

• Antenna Port Interface: MMCX Female

• Wiring Interface Standard: SH1.0 6-Pin Port

• Supported Video Formats: PAL / NTSC Automatic Detection

• Acoustic Monitoring: Integrated Real-Time Onboard Microphone

• Active Cooling Framework: Armored CNC Aluminum Heat-Dissipation Housing with Built-In Active Micro Turbofan

• Thermal Defenses: Onboard Smart Temperature Overheat Protection Circuit

• Frame Mounting Hole Dimensions: 20 mm x 20 mm (M2) & 30.5 mm x 30.5 mm (M2) Spacing Patterns

• Physical Module Dimensions: 36.3 mm x 36.3 mm x 15.1 mm

• Net Hardware Weight: 20.0 grams (VTX module alone)

What's Included

• 1 x GEPRC MATEN 5.8G 2.5W VTX PRO Analog Video Transmitter (Silver Version)

• 1 x MMCX Linear Copper Tube Antenna

• 1 x MMCX to RP-SMA Female Flexible Adapter Cable (75 mm)

• 1 x SH1.0 6-Pin Flight Controller Silicone Interconnect Wiring Harness (150 mm)

• 1 x Complete Structural Hardware Installation Screw Set (6 x M2x5mm and 4 x M2x12mm Screws)