The BrotherHobby Avenger 2808 Motor - 1350KV is a lightweight, high-torque outrunner brushless motor engineered specifically for 7-inch to 8-inch long-range FPV cruisers, mountain surfing rigs, and light-to-medium cinelifters. Built around a 2808 stator (28mm diameter by 8mm height) in a 12N14P electromagnetic configuration, the Avenger 2808 pairs ultra-thin 0.2mm Kawasaki silicon steel laminations with high-temperature N52H curved arc magnets to deliver smooth, linear throttle response and high cruising efficiency under extended battery payloads.
CNC-machined from aircraft-grade 7075 aluminum alloy for both the single-piece bell cap and base housing, the motor incorporates a weight-saving hollow titanium alloy shaft supported by oversized 12×6×4mm Japanese NMB ball bearings for low-vibration, gyro-clean operation. Rated for 4S to 6S LiPo power systems—and tuned as a benchmark 1350KV winding for 6S 7-inch builds—the motor ships with extended 25cm 18AWG silicone leads for clean routing along long carbon fiber arms while weighing just 54 grams including wires.
Efficiency-Tuned 1350KV 2808 Stator Design: 28mm × 8mm stator constructed with 0.2mm Kawasaki silicon steel laminations in a 12N14P pole layout delivers high torque and smooth, vibration-free cruising on 7-inch and 8-inch propellers.
Single-Piece 7075 Aluminum Bell & Base: CNC-machined Al 7075 single-piece rotor bell and base housing resist structural deformation during hard landings while maximizing cooling airflow.
Hollow Titanium Alloy Shaft: Reduces rotating mass without compromising strength, enhancing throttle responsiveness and crash durability.
Oversized Japanese NMB Bearings: Dual 12mm × 6mm × 4mm Japanese NMB ball bearings absorb radial and axial propeller loads for smooth, quiet operation and clean flight controller gyro data.
High-Temperature N52H Curved Arc Magnets: Precision-curved N52H neodymium magnets maintain tight air-gap tolerances and resist demagnetization during sustained long-range climbs.
Extended 25cm 18AWG Silicone Leads: Factory-installed 250mm 18AWG high-strand silicone motor wires reach central 4-in-1 ESC stacks on 7-inch and 8-inch frames without requiring wire splicing.
Brand / Manufacturer: BrotherHobby
Model Identifier: Avenger 2808 Motor (1350KV, CW)
KV Rating: 1350KV
Stator Size: 2808 (28.0 mm diameter × 8.0 mm height)
Configuration: 12N14P (12 Stator Slots / 14 Rotor Poles)
Input Voltage / Cell Count: 4S – 6S LiPo (Optimized for 6S 7-inch builds)
Stator Laminations: 0.2 mm Kawasaki Silicon Steel
Rotor Magnets: N52H Curved Arc Magnets
Bell Cap & Base Casing Material: CNC-Machined 7075 Aluminum Alloy (Single-Piece Bell)
Shaft Material & Design: Titanium Alloy Hollow Shaft
Propeller Adapter Shaft Thread: M5 (5.0 mm CW Thread)
Bearings: Japanese NMB Ball Bearings (12.0 mm × 6.0 mm × 4.0 mm)
Mounting Bolt Pattern: 19.0 mm × 19.0 mm (M3 Threaded Holes)
Motor Lead Wires: 18AWG Silicone Wire (SR), 250 mm (25 cm) Length
Net Weight: 54.0 grams (including 25cm 18AWG wires)
Recommended Propeller Size: 7-inch to 8-inch Propellers (e.g., 7×3.5×3, 7×4×3, 7×4.5, 8×4.5)
Target Applications: 7"–8" Long-Range FPV Drones, Mountain Cruisers, Light Cinelifters, and Macro Freestyle Multirotors
(1) BrotherHobby Avenger 2808 1350KV Brushless Motor (with 25cm 18AWG Silicone Wires)
(1) M5 Flanged Aluminum Propeller Locknut
(4) M3 Motor Mounting Screws
| Name | Value |
|---|---|
| MANUFACTURER | Brother Hobby |
| STATOR DIAMETER | 28 |
| STATOR HEIGHT | 08 |
| KV | 1350 |
| THREAD DIRECTION | Standard |
| SHAFT FOR COLLET MOUNT | no |
| GTIN | 76461333579 |