GEPRC GEP-M1025Q GPS Module – High-Precision M10 Navigation Hub with Integrated Magnetometer Compass
Achieve exceptional tactical positioning and fast satellite locks with the GEPRC GEP-M1025Q GPS Module. Engineered specifically for long-range FPV freestyle drones, professional cinematic multirotors, and custom sUAS platforms, this premium navigation module leverages u-blox’s cutting-edge M10050 processing chip architecture. By executing joint positioning across a dense multi-satellite grid—simultaneously processing GPS, BDS (BeiDou), Galileo, QZSS, and SBAS signals—the GEP-M1025Q tracks up to 32 satellites at once. Its defining physical feature is a massive, high-efficiency 25x25mm ceramic patch antenna, which dramatically increases surface area reception compared to micro-sized GPS units. This ensures stable connection quality and superior noise filtration even under thick forest canopy, around urban obstructions, or during aggressive high-G maneuvers.
Beyond rapid coordinate calculation, the specialized "Q" version integrates an onboard QMC5883L digital magnetometer compass. This sensor supplies your flight controller with real-time azimuth pointing and heading data, fulfilling the strict hardware requirements needed for safe Betaflight or INAV GPS Rescue routines and fully autonomous waypoint navigation. The module is built with an internal Flash memory chip and a high-capacity Farad capacitor, working in tandem to preserve custom user configuration settings and retain recent satellite ephemeris data. This layout enables rapid, second-long hot starts during field battery swaps, minimizing pad-prep delays. Complete with a clear onboard status LED indicator and an ultra-flexible pre-terminated wiring loom, this micro navigation hub provides industrial-grade reliability for custom unmanned systems, academic aerospace research, and high-performance RC hobby builds.
GPS Chip Processor: u-blox M10050 Core Platform
Supported GNSS Constellations: GPS, BDS (BeiDou), Galileo, QZSS, SBAS Joint Positioning
Maximum Tracking Satellites: Up to 32 Satellites Simultaneously
Ceramic Antenna Dimensions: 25 mm x 25 mm
Integrated Magnetometer (Compass): QMC5883L (INAV Alignment configuration: CW 0° flip)
Integrated Barometer: None (Dedicated to pure high-gain positioning and heading tracking)
Input Operating Voltage: 3.3V to 5.0V DC
Data Interface Bus: UART (GPS positioning data) & I2C (Compass clock/data lines)
Default Baud Rate Connection: 115200 bps
Update Refresh Output Frequency: 10 Hz
Horizontal Positioning Precision: 2D ACC 1.5 meters (Under optimal open-sky weather)
Speed Sensing Accuracy: 0.05 m/s
Receiver Signal Sensitivity: Trace: -162 dBm | Capture: -160 dBm
Module Core Board Dimensions: 29 mm x 29 mm x 8.2 mm
Total Module Hardware Weight: Approximately 11.5 grams
1 x GEPRC GEP-M1025Q GPS Module (with Integrated Compass)
1 x SH1.0 6-Pin Ultra-Flexible Silicone Terminal Wire Loom
1 x Pre-Cut Translucent Heat Shrink Protective Tubing Sleeve
1 x GEPRC Decorative Branding Decal Sticker Pack
1 x Comprehensive Technical Setup and Instruction Manual
| Name | Value |
|---|---|
| MANUFACTURER | GepRC |
You can also contact us at support@readymaderc.com.
Or give us a call at +1(740)-936-4500.