TBS Lucid Pro Stack 8S 60A
by Team Black Sheep

The TBS Lucid Pro Stack 8S 60A is an elite, high-voltage propulsion and flight management system designed to push the boundaries of modern drone performance. Engineered for professional racing, heavy-lift cinematic rigs, and tactical sUAS applications, this stack features an 8S-capable ESC and a high-speed AT32F435 flight controller. By utilizing an 8-layer high-current PCB and the innovative "Gorilla Mount" system, TBS has eliminated heat-trapping mounting bolts from the center of the ESC, allowing for unparalleled thermal efficiency. This architecture enables the stack to handle the immense electrical loads of 3S to 8S LiPo power systems while maintaining rock-solid reliability for props ranging from 3 to 11 inches.

Purpose-built for industrial sUAS manufacturers, government contractors, and university robotics labs, the Lucid Pro 8S stack delivers the processing overhead needed for advanced flight algorithms. The flight controller is equipped with the legendary MPU-6000 gyro, favored by professionals for its ultra-low noise and mechanical resilience. With 6 full UARTs, dual high-current BECs (5V and 9V), and an integrated AT7456E OSD, this stack seamlessly integrates with GPS modules, telemetry sensors, and high-definition digital systems like the DJI O3. The ESC runs on the cutting-edge AM32 firmware, offering superior motor timing, regenerative braking, and bidirectional DShot for a "locked-in" flight experience in mission-critical environments.

Specifications

• Flight Controller MCU: AT32F435RMT7 (288MHz)

• Gyro/IMU: MPU-6000 (Professional/Pro Variant)

• ESC Firmware: AlkaMotors32 (AM32) / Target: tbslu8s4in1

• Input Voltage: 3S - 8S LiPo (up to 33.6V)

• Continuous Current: 70A x 4 (60s rating)

• Peak Current: 85A x 4 (30s burst)

• BEC Outputs: 9V / 2.5A and 5V / 2.0A

• Blackbox Logging: 8MB Flash

• UARTs: 6 Serial Ports (UART 1, 3, 4, 5, 7, 8)

• OSD: AT7456E (Analog compatibility)

• ESC Protocol: Bi-directional DShot 300/600, KISS ESC Telemetry

• Mounting: Gorilla-mount (39.5 x 16.0mm) with brackets for 20x20 and 30.5x30.5mm

• Weight: 17.58g (ESC) / 4.51g (FC)

What is Included

• 1x TBS Lucid Pro Flight Controller (MPU-6000)

• 1x TBS Lucid 60A 8S 4-in-1 ESC

• 1x TBS Gorilla Adapter Plate Set (20x20 & 30.5x30.5)

• 1x FC-to-ESC Interconnect Cable

• 1x High-Voltage Low ESR Capacitor

• 1x XT60 Power Lead

• 1x Vibration Damping Hardware Pack