Arrows Bigfoot 1300mm RTF with Vector Flight Stabilization System
by Arrows

The Arrows Bigfoot 1300mm RTF with Vector Flight Stabilization System (SKU: AH010R-VEC) is a high-wing all-terrain bush trainer and STOL (Short Take-Off and Landing) aircraft engineered for beginner to intermediate RC pilots. Built from durable, composite-reinforced EPO foam, the Bigfoot incorporates high-lift wing geometry, oversized tundra-style balloon tires, and functional split flaps that allow takeoffs in under three meters and smooth landings on rough grass, gravel, dirt, and unpaved terrain.

This Ready-to-Fly (RTF) package comes fully equipped from the factory with a 3536-850KV brushless outrunner motor, a 40A ESC, six pre-installed 9g servos, and the factory-tuned Vector Flight Stabilization System. The Vector gyro offers three switchable modes: Stability (auto-leveling and bank angle limits for training), Dynamic (counteracts non-pilot inputs like wind gusts), and Direct (gyro off for manual aerobatics). The package also includes an Arrows AR06 6-channel 2.4GHz radio system, an 11.1V 2200mAh 25C 3S LiPo battery with an XT60 plug, and a dedicated balance charger.

Key Features

• Complete Ready-to-Fly (RTF) Package: Arrives out of the box with the aircraft, electronics, Vector gyro, 6-channel radio system, 3S LiPo battery, and balance charger.

• Vector Flight Stabilization System: Three flight modes—Stability (auto-leveling and envelope protection), Dynamic (wind-gust damping), and Direct (manual sport flying)—selectable via a 3-position transmitter switch.

• STOL Flight Performance: High-lift wing profile paired with functional, pre-hinged flaps enables ultra-short takeoffs in under 3 meters and low-speed landing approaches.

• All-Terrain Heavy-Duty Tundra Wheels: Large balloon tires absorb ground impacts, allowing rollouts on thick grass, packed dirt, gravel, and rough surfaces without flipping over.

• Factory-Installed Scale LED Lighting: Includes pre-wired navigation lights, bright landing lights, and wingtip strobe lights for improved orientation during dusk and dawn flights.

• Fast Screw-Together Construction: Modular airframe requires no gluing and can be fully assembled at the bench or field in 10 to 20 minutes.

• Durable EPO Foam Airframe: Molded from resilient EPO foam with carbon spar reinforcement, providing a balance of structural rigidity, impact repairability, and light wing loading.

Technical Specifications

• Brand / Manufacturer: Arrows Hobby (distributed via HobbyZone)

• Model Identifier: 1300mm Bigfoot RTF with Vector System

• Manufacturer SKU / Part Number: AH010R-VEC (ARR010R-V)

• Completion Level: Ready-To-Fly (RTF)

• Wingspan: 1300 mm (51.1 in)

• Overall Length: 1060 mm (41.7 in)

• Flying Weight: ~1310 grams (46.2 oz)

• Center of Gravity (CG): 60 mm – 70 mm from the wing leading edge

• Airframe Material: High-Density EPO Foam

• Assembly / Build Time: 10 – 20 Minutes (No Glue Required)

• Motor: 3536-850KV Brushless Outrunner Motor

• Electronic Speed Control (ESC): 40A Brushless ESC with XT60 Connector

• Propeller: 11 x 7, 2-Blade Propeller

• Servos: (6) 9g Precision Micro Servos (Ailerons x2, Elevator x1, Rudder x1, Flaps x2)

• Flight Stabilization: Factory-Installed Arrows Vector 3-Axis Gyro

• Radio System: Arrows AR06 6-Channel 2.4GHz Transmitter & Receiver

• Included Flight Battery: 11.1V 2200mAh 25C 3S LiPo with XT60 Plug

• Included Charger: 3S LiPo Balance Charger with AC Power Adapter

• Flight Control Surfaces: Rudder, Elevator, Ailerons, Flaps, and Throttle

• Landing Gear: Heavy-duty fixed aluminum gear with high-bounce tundra balloon wheels.

What Is Included

• (1) Arrows Bigfoot 1300mm Airframe with pre-installed motor, ESC, and 6 servos

• (1) Arrows Vector Flight Stabilization Gyro Module

• (1) Arrows AR06 6-Channel 2.4GHz Transmitter

• (1) Arrows 6-Channel 2.4GHz Receiver

• (1) 11.1V 2200mAh 25C 3S LiPo Battery with XT60 Connector

• (1) 3S LiPo Balance Charger and Power Supply

• (1) 11 x 7 2-Blade Propeller and Spinner Set

• (1) Hardware, Landing Gear, and Screw Set

• (1) User and Flight Instruction Manual.

Needed to Complete

• (4) AA Alkaline Batteries for the 2.4GHz Transmitter.