The HEE WING T1-S Ranger PNP FPV Airplane 790mm EPP FPV Gray - With Foam Case (Model: T1-S-PNP) is a compact, modular twin-motor fixed-wing FPV platform engineered for long-range cruising, aerial exploration, and portable field deployment. Evolving from the original 730mm T1 Ranger, the T1-S expands the wingspan to 790mm for improved glide efficiency, payload capacity, and flight endurance. Molded from crash-resistant EPP foam in an FPV Gray finish, the airframe incorporates an enlarged internal fuselage compartment to comfortably house modern digital HD video transmitters (such as DJI O3/O4 Air Units or Walksnail Avatar), flight controllers, GPS modules, and high-capacity 4S Li-Ion or LiPo battery packs.
Built for rapid, tool-free assembly at the flying field, the T1-S features snap-fit detachable main wings with integrated quick-release electrical connectors alongside a quick-release carbon tail boom and modular tail surfaces. A redesigned upper-wing aileron servo layout elevates the servo arms above the airfoil to prevent ground strikes during belly landings, while an upgraded hatch locking mechanism secures internal avionics in flight. Supplied as a Plug-and-Play (PNP) package with twin pre-installed FX1406-3150KV brushless motors, HEE WING 20A BLS ESCs, and 4.3g micro servos, the kit ships inside a custom-molded EPP foam travel and storage case for effortless transport.
Expanded 790mm Wingspan & Enlarged Fuselage Bay: Increased 790mm span and 715mm fuselage length extend flight endurance and provide generous internal volume for FPV VTXs, flight controllers, GPS units, and larger 4S batteries.
Tool-Free Modular Quick-Release Airframe: Snap-fit main wings with integrated electrical quick-disconnect plugs and a quick-release tail boom allow fast assembly and breakdown without tools.
Upper-Mounted Aileron Servo Architecture: Positions aileron servos and control linkages on the top surface of the wings, protecting hardware from grass snags and impact damage during belly landings.
Pre-Installed Twin Brushless Power System: Arrives factory-equipped with two FX1406-3150KV brushless motors, two HEE WING 20A BLS ESCs, three 4.3g micro servos, and matched 3830 propellers for 4S operation.
Included Molded EPP Travel & Storage Case: Ships in a custom-fitted EPP carrying case that organizes and protects the fuselage, wings, tail surfaces, and accessories during travel.
Upgraded Hatch Locking & T1 Ecosystem Compatibility: Reinforced fuselage hatch latch prevents canopy separation in turbulent air while maintaining compatibility with existing HEE WING T1 camera mounts and accessories.
Model Identifier: T1-S Ranger PNP FPV Airplane (790mm, FPV Gray, With Foam Case)
Manufacturer Model / SKU: T1-S-PNP
Airframe Material: Molded EPP Foam with Carbon Fiber Reinforcement Spars & Boom
Color Finish: FPV Gray
Wingspan: 790 mm
Fuselage Length: 715 mm
Takeoff Weight Range: 600 g – 950 g (depending on battery and FPV payload configuration)
Motors: (2) HEE WING FX1406-3150KV Brushless Motors (Pre-installed)
Electronic Speed Controllers (ESCs): (2) HEE WING 20A BLS Brushless ESCs (Pre-installed)
Servos: (3) 4.3g Micro Servos (2x Aileron, 1x Elevator; Pre-installed)
Propellers: (2) 3830 (3.8" x 3.0") 2-Blade Propellers (1x CW, 1x CCW)
Recommended Battery: 4S LiPo (1300mAh–2200mAh) or 4S Li-Ion (3000mAh–4000mAh 18650/21700 pack)
Transport Case: Custom-Molded EPP Storage & Transportation Foam Case (Included)
(1) HEE WING T1-S Ranger Molded EPP Fuselage (with pre-installed power distribution board and hatch)
(1) Left Main Wing (with pre-installed FX1406-3150KV motor, 20A BLS ESC, 4.3g servo, and quick-release wiring plug)
(1) Right Main Wing (with pre-installed FX1406-3150KV motor, 20A BLS ESC, 4.3g servo, and quick-release wiring plug)
(1) Horizontal Tail Stabilizer
(1) Vertical Tail Fin
(1) Carbon Fiber Tail Boom (with pre-installed 4.3g elevator servo)
(1) Carbon Fiber Main Wing Spar Rod
(1) Propeller Set containing (2) 3830 Propellers (CW & CCW)
(1) Battery Mounting Plate
(1) Control Linkage & Hardware Accessories Bag (control horns, linkage rods, horn chucks/buckles)
(1) Custom-Molded EPP Storage & Transportation Foam Case
(1) 4-Channel or Greater Radio Transmitter and Compatible RC Receiver (e.g., ExpressLRS, TBS Crossfire, or FrSky)
(1) 4S LiPo or 4S Li-Ion Flight Battery (1300mAh–4000mAh recommended) with matching power connector
(1) Compatible 4S LiPo/Li-Ion Balance Battery Charger
(Optional) Fixed-Wing Flight Controller & M10 GPS Module (e.g., SpeedyBee F405 Wing Mini or Matek F405-WMN running INAV or ArduPilot for stabilization and Return-to-Home)
(Optional) FPV Camera, Video Transmitter (Digital HD or Analog), and FPV Goggles / Monitor
(Optional) Foam-Safe CA Glue (for securing control horn buckles during assembly)
| Name | Value |
|---|---|
| MANUFACTURER | Hee Wing |
| GTIN | 723326382130 |