The BrotherHobby Avenger 2806.5 1300KV Brushless Motor is an ultralight, high-efficiency outrunner propulsion motor engineered for 6-inch to 7-inch long-range FPV cruisers, mountain surfing builds, and lightweight cinelifters. Built around a wide, low-profile 2806.5 stator (28.0mm diameter by 6.5mm height) in a 12N14P electromagnetic configuration, the Avenger 2806.5 combines ultra-thin 0.2mm Kawasaki silicon steel laminations with high-temperature N52H curved arc magnets to deliver smooth torque linearity, low current draw, and extended battery endurance across long-distance flights.
CNC-machined from aircraft-grade 7075 aluminum alloy for both the bell cap and base casing, the motor incorporates a weight-saving hollow titanium alloy shaft supported by oversized 12×6×4mm Japanese NMB ball bearings for low-vibration, gyro-clean operation. Rated for 4S to 6S LiPo power systems—and widely regarded as a benchmark 1300KV winding for 6S 7-inch long-range setups—the motor weighs just 41 grams (with short SR wires) and ships with factory-installed 20cm 18AWG silicone leads for clean routing along long carbon fiber arms.
Long-Range Tuned 1300KV 2806.5 Stator: Wide 28.0mm × 6.5mm stator built with 0.2mm Kawasaki silicon steel laminations in a 12N14P pole layout delivers high rotational torque and superior cruising efficiency on 6-inch and 7-inch propellers.
Ultralight 41g Construction: Low-profile stator geometry and hollow titanium shaft keep base motor weight down to 41 grams (with short SR wires), extending flight times on LiPo and Li-Ion packs.
7075 Aircraft-Grade Aluminum Bell & Base: CNC-machined Al 7075 bell cap and base housing resist structural deformation during hard landings while promoting rapid heat dissipation.
Oversized Japanese NMB Bearings: Dual 12mm × 6mm × 4mm Japanese NMB ball bearings support high radial and axial propeller loads for smooth, low-resonance rotation and clean flight controller gyro data.
High-Temperature N52H Curved Arc Magnets: Precision-curved N52H neodymium magnets maintain tight air-gap tolerances and resist thermal demagnetization during sustained high-altitude climbs.
Extended 20cm 18AWG Silicone Leads: Factory-installed 200mm 18AWG high-strand silicone motor wires reach central 4-in-1 ESC stacks on 7-inch frames without requiring wire splicing.
Brand / Manufacturer: BrotherHobby
Model Identifier: Avenger 2806.5 Motor (1300KV)
KV Rating: 1300KV
Stator Size: 2806.5 (28.0 mm diameter × 6.5 mm height)
Configuration: 12N14P (12 Stator Slots / 14 Rotor Poles)
Input Voltage / Cell Count: 4S – 6S LiPo (Optimized for 6S 7-inch builds)
Stator Laminations: 0.2 mm Kawasaki Silicon Steel
Rotor Magnets: N52H Curved Arc Magnets
Bell Cap & Base Casing Material: CNC-Machined 7075 Aluminum Alloy
Shaft Material & Design: Titanium Alloy Hollow Shaft
Propeller Adapter Shaft Thread: M5 (5.0 mm CW Thread)
Bearings: Japanese NMB Ball Bearings (12.0 mm × 6.0 mm × 4.0 mm)
Mounting Bolt Pattern: 19.0 mm × 19.0 mm (M3 Threaded Holes)
Motor Lead Wires: 18AWG Silicone Wire (SR), 200 mm (20 cm) Length
Net Weight: 41.0 grams (with short SR wires)
Recommended Propeller Size: 6-inch to 7-inch Propellers (e.g., 7×3.5×3, 7×4×3, 7×4.5, 6×4.5)
Target Applications: 6"–7" Long-Range FPV Drones, Mountain Cruisers, Light Cinelifters, and Macro Freestyle Multirotors
(1) BrotherHobby Avenger 2806.5 1300KV Brushless Motor (with 20cm 18AWG Silicone Wires)
(1) M5 Flanged Aluminum Propeller Locknut
(4) M3 Motor Mounting Screws
| Name | Value |
|---|---|
| MANUFACTURER | Brother Hobby |
| STATOR DIAMETER | 28 |
| STATOR HEIGHT | 6.5 |
| KV | 1300 |
| THREAD DIRECTION | Standard |
| SHAFT FOR COLLET MOUNT | no |