Holybro PIX32 V6 Standard Baseboard Cable Set
by Holybro

The Holybro PIX32 V6 Standard Baseboard Cable Set (SKU: 18083) is a dedicated avionics wiring harness kit engineered specifically for the Pix32 v6 Standard Baseboard (SKU: 18082) and compatible modular flight controller systems. Designed to break out and interconnect the flight controller's full suite of communications and power monitoring ports, this kit utilizes industrial Dronecode-standard JST-GH (1.25mm pitch) latching connectors, high-flexibility 26AWG silicone-insulated wire, and standard 0.1" (2.54mm) servo connectors.

This complete harness kit provides all necessary wiring to interface primary flight avionics, including dual analog power modules (PM02 V3 / PM07), telemetry transceivers (Telem 1, Telem 2, Telem 3), dual GNSS/compass units (such as the standard 10-pin GPS1 with integrated safety switch/buzzer lines and 6-pin GPS2), redundant DroneCAN buses, external USB breakouts, and DSM/Spektrum satellite receivers. It serves as a direct replacement package or build kit for enterprise integrators and UAV builders outfitting fixed-wing, multirotor, or VTOL platforms.

Key Features

• Full Interconnect Compatibility: Tailored specifically to match the port configuration and pinouts of the Holybro Pix32 v6 Standard Baseboard (SKU: 18082).

• Dronecode JST-GH Latching Architecture: Features vibration-resistant, positive-locking 1.25mm JST-GH connectors across all digital telemetry, CAN, I2C, GPS, and power sensor leads to prevent in-flight disconnects.

• High-Flexibility 26AWG Silicone Wiring: Ultra-pliable multi-strand silicone-insulated conductors withstand high vibration and simplify clean harness routing through cramped fuselage spaces.

• Comprehensive GPS & Sensor Harnessing: Includes the primary 10-pin JST-GH harness connecting full serial GNSS data, I2C compass, safety switch, safety LED, and buzzer signals in a single line.

• Dual Power & CAN Bus Wiring: Supplies cabling for redundant dual-battery analog monitoring modules as well as CAN1/CAN2 high-speed peripheral buses.

• Dedicated Spektrum / DSM Lead: Equipped with a 3-pin JST-ZH (1.5mm pitch) connector pre-terminated to interface directly with Spektrum DSM2/DSMX satellite receivers.