The Castle Creations Talon 25-Amp 25V ESC with 8-Amp BEC (Part #: 010-0128-00 / SKU: CSE010012800) is an ultra-compact, high-voltage brushless electronic speed controller engineered for 400-size electric helicopters, 3D foamies, and lightweight park-flyer aircraft. Operating across a wide 2S to 6S LiPo (up to 25.2V DC) input range, this speed controller delivers up to 25 amps of continuous motor current at full throttle while maintaining a slim 43.7 x 18.2 x 8.1 mm footprint and weighing just 17.9 grams with wires (7.9 grams without wires).
Despite its miniature form factor, the Talon 25 integrates an exceptionally robust switching BEC outputting a regulated 5.5V at 3 amps continuous and up to 8 amps peak—providing abundant power for high-torque digital cyclic and tail servos without requiring a separate receiver pack. Equipped with Castle Creations' industry-leading helicopter governor modes, audible motor and LED diagnostic alerts, and Castle Telemetry Link support (for Futaba S.BUS2 and Spektrum X-BUS), the ESC is fully customizable via the Castle Link Windows software using the included free Castle Link USB adapter coupon.
High-Output 8A Peak / 3A Continuous BEC: Built-in 5.5V switching BEC supplies 3A continuous and 8A peak current, effortlessly powering demanding digital servos in 400-class helicopters and 3D aerobatic airplanes.
Wide 2S–6S LiPo Input Envelope: Supports battery configurations from 2S up to 6S LiPo (25V max) while delivering 25A continuous current with proper cooling airflow.
Castle Helicopter Governor & Airplane Modes: Features precision head-speed governing, soft-start spool-up, autorotation bailout, and customizable throttle curves tailored for micro/400-size helis and fixed-wing models.
Full Castle Link Programmability: Unlocks advanced parameter tuning, custom setup profiles, and free firmware updates via Castle Link Windows software (includes a coupon for a free Castle Link USB programming adapter).
Audible & Visual Power System Alerts: Emits distinct motor tone sequences and flashing LED codes to alert pilots to over-temperature events, excessive load, low-voltage cutoff, and locked head-speed status.
Castle Telemetry Link Ready: Compatible with Castle Telemetry Link adapters for Futaba S.BUS2 (010-0152-00) and Spektrum X-BUS (010-0148-00) to stream live ESC telemetry (excluding battery current) to compatible transmitters.
Ultralight 17.9g Micro Profile: Compact 43.7 x 18.2 x 8.1 mm chassis fits easily inside tight helicopter frames and slim foamie fuselages.
Input Voltage Range: 2S – 6S LiPo (25V Max)
Continuous Current Rating: 25A (at full throttle with adequate airflow)
Integrated BEC Output Voltage: 5.5V DC (Fixed)
Integrated BEC Current Rating: 3A Continuous / 8A Peak
Battery & Motor Connectors: Bare Wire Leads (User-installed connectors required)
Receiver Interface: Standard 3-Pin PWM Throttle & Telemetry/Programming Lead
Telemetry Support: Castle Telemetry Link Capable (Futaba S.BUS2 and Spektrum X-BUS compatible; reports all supported ESC parameters except battery current)
Programmability: Castle Link Windows Software (via Castle Link USB Adapter) and Basic Transmitter Stick Programming
Dimensions (L x W x D): 43.7 mm x 18.2 mm x 8.1 mm (1.72 in x 0.72 in x 0.32 in)
Net Weight: 17.9 grams (0.63 oz) with wires / 7.9 grams (0.28 oz) without wires
Manufacturer Warranty: 1-Year Limited Warranty
Target Applications: 400-Size Electric Helicopters, 3D Foamies, Park Flyers, and Light Fixed-Wing Aircraft
(1) Castle Creations Talon 25-Amp 25V Brushless ESC with 8-Amp BEC (Part #: 010-0128-00)
(1) Talon User Guide & Safety Manual
| Name | Value |
|---|---|
| MANUFACTURER | Castle Creations |
| BATTERY CONNECTOR | Solder/DIY |
| BEC | yes |
| AMP RATING | 25 |