The SpeedyBee F405 AIO V2 35/40A Bluejay 25.5x25.5 3-6S Flight Controller (With CNC Case, SKU: SB-F405AIO-V2-HS) is an integrated flight controller and 4-in-1 ESC board engineered for 3-inch to 3.5-inch cinewhoops, lightweight 5-inch freestyle quads, and high-performance micro drones. Enclosed in a dual-sided CNC-machined aluminum alloy heatsink shell, this version elevates the continuous ESC current rating to 40A per motor (45A burst) by dissipating heat across heavy power bursts while protecting internal surface-mount components from impact and debris.
Powered by an STM32F405 processor running Betaflight and an ICM-42688P low-noise gyroscope, the board integrates a 4-in-1 ESC pre-flashed with Bluejay JH-40 48kHz firmware supporting bidirectional DShot and RPM filtering. It features onboard Bluetooth BLE for wireless configuration and ESC tuning through the SpeedyBee mobile app, an integrated SPA06-003 barometer, 8MB blackbox flash memory, direct plug-and-play DJI Air Unit connectivity, and an external dual-voltage (5V/9V) auxiliary BEC module to reliably power digital video transmitters and LED arrays.
Dual-Sided CNC Aluminum Heatsink: Encloses the top and bottom of the PCB in an anodized aluminum case, improving thermal dissipation under load and guarding against prop strikes and foreign debris.
Increased 40A Continuous Rating: The heatsink casing enables an upgraded current handling profile of 40A continuous (160A combined) and 45A peak burst per channel across 3S to 6S LiPo power.
STM32F405 MCU & ICM-42688P Gyro: High-speed 168MHz processing architecture paired with an ICM-42688P IMU ensures responsive PID tracking and flight stability.
Integrated 4-in-1 ESC with Bluejay: Pre-flashed with Bluejay JH-40 48kHz firmware to deliver linear throttle response, cooler motor temperatures, and bidirectional DShot RPM filtering.
Wireless Bluetooth Configuration: Built-in Bluetooth BLE module with an integrated PCB antenna enables field tuning, PID adjustment, motor direction testing, and firmware flashing via the SpeedyBee smartphone app.
Direct DJI O3 / Digital FPV Connector: Dedicated 6-pin SH1.0 port provides plug-and-play wiring for DJI O3 Air Unit, Caddx Vista, Walksnail Avatar, and RunCam Link systems without soldering.
External 5V / 9V Dual-Voltage BEC: Includes an external plug-in switching regulator board configurable for 5V or 9V output (up to 1.5A) to isolate video transmitter power draw from the flight controller logic.
Comprehensive Peripheral Support: Features four full UARTs, dedicated I2C pads for external compass modules, 8MB onboard flash for blackbox data logging, and built-in AT7456E analog OSD.
Beginner-Friendly Practice Board: Ships with a replica soldering practice board mirroring the AIO pad layout to help pilots verify soldering iron temperature and technique before working on the main board.
Brand / Manufacturer: SpeedyBee
Model Identifier: SpeedyBee F405 AIO V2 (CNC Heatsink Edition)
Manufacturer SKU / Part Number: SB-F405AIO-V2-HS
UPC / GTIN: 723326380754
Flight Controller Processor (MCU): STM32F405 (32-Bit ARM Cortex-M4, 168 MHz)
Inertial Measurement Unit (IMU): ICM-42688P (SPI)
Barometer: SPA06-003 / SPL06-003
OSD Chip: AT7456E (Analog Betaflight OSD) & HD DisplayPort support
Blackbox Storage: 8 MB Onboard SPI Flash
Wireless Connectivity: Bluetooth BLE (SpeedyBee App compatible) with integrated PCB antenna
Firmware Target: SPEEDYBEEF405AIOV2
Input Voltage Range: 3S – 6S LiPo (11.1V – 25.2V DC)
Onboard BEC Outputs: 5V / 1.5A (FC & Peripherals) | 4.5V / 1.0A (Receiver via USB)
External Auxiliary BEC: Configurable 5V / 9V Output (1.5A Max)
UART Interfaces: 4 Full Sets (UART3, UART4, UART5, UART6) + Inverted SBUS (RX2)
I2C Bus: Supported (SDA / SCL solder pads)
Buzzer & LED Terminals: Dedicated solder pads for 5V active buzzer and programmable WS2812 LEDs
Digital FPV Interface: 6-Pin SH1.0 Port & Solder Pads (DJI Air Unit compatible)
USB Interface: External Type-C Extension Module & Solder Pads
Rated Continuous Current: 40A per channel (160A four-channel combined)
Peak Burst Current: 45A per channel (180A four-channel combined, < 10 seconds)
Input Voltage: 3S – 6S LiPo
ESC Firmware: Factory pre-loaded Bluejay JH-40 48kHz
ESC Protocol Support: DShot300 / DShot600
Current Sensor: Integrated (Betaflight Scale: 88, Offset: 0)
Enclosure / Casing: Double-Sided CNC Machined Aluminum Heatsink
Mounting Pattern: 25.5 mm x 25.5 mm (M2 mounting holes with silicone dampening grommets)
Dimensions: 33.0 mm x 33.0 mm x 8.0 mm
Net Weight: 12.8 grams (complete with CNC heatsink case)
(1) SpeedyBee F405 AIO V2 Flight Controller with Dual-Sided CNC Case (SKU: SB-F405AIO-V2-HS)
(1) Soldering Practice Board
(1) External 5V / 9V Dual-Voltage BEC Module
(1) Power Expansion Board
(1) External Type-C USB Extension Board with 4-Pin 80mm Cable
(1) 35V 470µF Low-ESR Electrolytic Capacitor
(1) Pre-Crimped XT30 Power Cable (70 mm)
(1) 6-Pin SH1.0 DJI Air Unit Connection Cable (80 mm)
(1) 6-Pin SH1.0 Cable for External BEC (30 mm)
(1) 4-Pin Meteor LED Strip Connection Cable (80 mm)
(4) M2 x 7.7mm Silicone Vibration Dampening Sleeves
(4) M2 x 8.4mm Silicone Vibration Dampening Sleeves
(5) M2 Silicone O-Rings
(5) M2 Nylon Hex Nuts
(4) M2 x 12mm Machine Screws
(4) M2 x 20mm Machine Screws
(2) Transparent Heat Shrink Tubes
(2) Black Heat Shrink Tubes for Capacitor
(1) Quick Start Guide & Wiring Reference
| Name | Value |
|---|---|
| MANUFACTURER | Speedybee |
| MOUNTING SIZE | Custom |