The Holybro H-Flow (Optical Flow and Distance Sensor Module) (SKU: 19006) is an all-in-one DroneCAN navigation sensor engineered to deliver precision altitude hold, terrain following, and drift-free horizontal position estimation in GPS-denied environments. Integrating a PixArt PAA3905E1 optical flow sensor, a Broadcom AFBR-S50LV85D long-range Time-of-Flight (ToF) laser distance sensor, and an InvenSense ICM-42688-P 6-axis IMU onto a single STM32F412CEU6-powered board, the H-Flow eliminates the complexity of wiring and synchronizing separate rangefinder and optical flow modules.
Built for indoor inspection drones, warehouse autonomous UAVs, and precision landing applications, the H-Flow tracks ground textures across a wide 80mm to 30m operating range and functions in low-light environments down to >5 lux using an onboard 40mW 120° infrared illuminator. Simultaneously, its 850nm 32-pixel Broadcom ToF sensor measures distances up to 30 meters under ambient lighting up to 200k lux across varied surface materials. Equipped with a Pixhawk-standard 4-pin JST-GH CAN connector and software-configurable CAN termination, the module weighs 15.2 grams with its protective enclosure (3.5 grams bare PCB) and supports over-the-bus firmware updates and dynamic node allocation in PX4 and ArduPilot.
Integrated 3-in-1 Sensor Fusion Architecture: Combines a PixArt PAA3905E1 optical flow camera, Broadcom AFBR-S50LV85D 30m Time-of-Flight rangefinder, and InvenSense ICM-42688-P 6-axis IMU on a single unified PCB.
Low-Light & All-Surface Tracking: Tracks surface motion in dim conditions down to >5 lux with a built-in 40mW 120° IR LED illuminator, while the 850nm ToF laser maintains reliable distance lock in up to 200,000 lux direct sunlight.
Extended 80mm to 30m Operating Envelope: Supports both close-quarters indoor hovering and high-ceiling or outdoor low-altitude terrain following up to 30 meters.
High-Speed DroneCAN Interface: Connects via a Pixhawk-standard 4-pin JST-GH CAN port for noise-immune communication, dynamic node allocation, and direct CAN bus firmware updates.
Software-Controlled CAN Termination: Built-in software-toggleable 120Ω CAN bus termination simplifies multi-node CAN bus topologies without requiring external terminator plugs.
Compact Dual-Mount Housing: Ships in a protective enclosure with M2.5 mounting hardware at 15.2g total weight, or can be installed as a bare 3.5g board for weight-critical micro platforms.
Brand / Manufacturer: Holybro
Model Identifier: H-Flow (Optical Flow and Distance Sensor Module)
Manufacturer SKU / Part Number: 19006
Main Microcontroller (MCU): STMicroelectronics STM32F412CEU6
Optical Flow Sensor: PixArt PAA3905E1
Minimum Illumination: > 5 lux (with built-in 40 mW 120° viewing angle IR LED)
Effective Field of View (FoV): Up to 42°
Working Distance Range: 80 mm – 30 m
Max Motion Tracking Rate: Up to 7.4 rad/s
Distance / Rangefinder Sensor: Broadcom AFBR-S50LV85D Time-of-Flight (ToF)
Laser Light Source: Integrated 850 nm Infrared Laser
Receiver Array & FoV: 32-Pixel Detector Array; 12.4° x 6.2° FoV (2° x 2° transmitter beam illuminating 1–3 pixels)
Typical Distance Sensing Range: Up to 30 meters
Ambient Light Immunity: Up to 200,000 Lux (200k Lux)
Inertial Measurement Unit (IMU): InvenSense ICM-42688-P (6-Axis Gyroscope & Accelerometer)
Communication Protocol: DroneCAN (PX4 DroneCAN firmware pre-installed; supports dynamic node allocation and CAN OTA updates)
CAN Bus Termination: Software-Controlled CAN Termination Toggle
Interface Connector: Pixhawk Standard 4-Pin JST-GH CAN Connector (5V DC bus-powered)
Net Weight: 15.2 grams (with casing) / 3.5 grams (bare PCB without casing)
Autopilot & Firmware Compatibility: Pixhawk-series flight controllers with CAN port (Pixhawk 6C, Pixhawk 6X, Pixhawk 5X, Durandal, Pix32 v6); PX4 (v1.15+) and ArduPilot
(1) Holybro H-Flow Optical Flow and Distance Sensor Module (SKU: 19006)
(1) 4-Pin JST-GH CAN Interconnect Cable
(2) M2.5 Mounting Screws
(2) M2.5 Nylon Locking Hex Nuts
| Name | Value |
|---|---|
| MANUFACTURER | Holybro |