Beacon - Foam-Tac Adhesive (2oz)
by Beacon Adhesives

ATTENTION: According to UN1133 shipping regulations, this product cannot ship via Air service.

FOAM-TAC’S improved formula now contains UV blockers so that it can be used in the field in direct sunlight without any yellowing or degrading. We’ve also added a special adhesion promoter to make the glue even stronger and more durable than before.  

Hands down, Foam-Tac is the best choice for  building  and repairing all parts of foam planes including motor mounts,  control horns and rods, attaching servos, and tacking down wires.

FOAM-TAC offers many advantages over other types of glues that have been used on R/C planes. Since a little Foam-Tac goes a long way, you’ll build plane after plane with one bottle, saving time, money and materials.

• Foam-Tac never yellows or becomes brittle.
• Very low odor, no fumes.
• Dries fast and crystal clear.
• Never foams or expands or needs a kicker.
• Remains flexible. Glue joints flex with the foam, preventing separation from hard impacts.
• Long shelf life –up to 2 years if properly stored away from heat and with white cap replaced.  If white cap is lost, remove applicator cap and put a small piece of aluminum foil over the opening and then replace the applicator. Store at room temperature.
• No need to store in the fridge or freezer.
• Works on ALL types of foam including Depron, EPP, EPO, Styrofoam, insulating foam, and even florist’s foam, as well as with balsa wood and carbon fiber.
• Great for waterproofing.