This is a 3-wire camera lead compatible with many different common FPV cameras.
The wiring order on the camera connector as delivered will fit the following cameras directly:
RMRC-520, RMRC-420XV, RMRC-MINI, RMRC-PICO, DPC-171/KX-171,
It will fit the following cameras by simply rearranging the wiring order (User responsible for verifying compatibility):
SN777 , KX-131, KX-191, Others?
Not compatible with the RCV922.
REQUIRES A VIDEO JUMPER CABLE TO ATTACH TO THE STANDARD READYMADERC TRANSMITTER CABLES. Will plug in directly to many OSD's, and adapters are available to allow this cable to be used with the ImmersionRC OSD and transmitters.
If using the cable with a different wiring order, the wires can be removed by carefully lifting up the tab with the tip of a hobby knife and pulling the wires out. They can then be re-inserted in the proper order for your camera.
Total cable length of 12", terminated in a female servo connector. Ideal for connecting your camera to the Eagle Tree OSD's, or RangeVideo OSD. This cable will connect to the transmitter cable I offer by using an available video jumper.
PLEASE NOTE: This cable feed the voltage directly, so if you're powering your system with a 12V battery and you have a 5V camera such as the KX131, you need to either use a regulator before the cable.