No crimping, soldering, or worrying! This cable will allow you to connect your EZUHF receiver to your EZOSD for on screen RSSI information and so you can turn the display on/off with an RC channel!
Ready Made....they way it's supposed to be! :)
*Note: At the request of ImmersionRC, to prevent ground loop issues, there is no ground connection in this cable between the EZOSD and the EZUHF. If your grounds are not connected otherwise (as they normally would be through the other connections in the R/C system), you should ensure that you have all the grounds tied together.
Contact us on Facebook Messenger Contact us via email at firstname.lastname@example.org