Hobbywing XRotor G2 Micro 65A 6S AM32 4-in-1 ESC
by HobbyWing

Hobbywing XRotor G2 Micro 65A 6S AM32 4-in-1 ESC - 30x30

Elevate your racing or freestyle build with the Hobbywing XRotor G2 Micro 65A, a powerhouse 4-in-1 ESC designed to deliver unshakeable reliability and ultra-smooth throttle control. Engineered for the most demanding FPV pilots, sUAS contractors, and STEM engineering labs, this G2 edition brings the legendary durability of Hobbywing into the modern era of AM32 open-source firmware. Its high-current capability and refined hardware make it a top choice for government and military sUAS requiring a robust power link for high-load conditions and heavy-lift maneuvers.

The XRotor G2 Micro is built on a next-generation 32-bit ARM F4 MCU running at 120MHz, ensuring lightning-fast computation and instantaneous response to flight controller commands. By adopting AM32 firmware, it offers expanded motor compatibility and a variable PWM refresh rate (48–96 kHz) that dynamically adjusts for maximum efficiency and precision. The integrated design includes a built-in voltmeter for real-time telemetry, allowing pilots to monitor battery health and current draw through their OSD—critical for maintaining situational awareness during long-range reconnaissance or high-stakes racing.

Technical Specifications

• Continuous Current: 65A per channel

• Burst Current: 80A per channel (10s)

• Input Voltage: 3-6S LiPo (11.1V – 22.2V)

• Firmware: AM32 (Open-source)

• MCU: 32-bit ARM Cortex-M4 @ 120 MHz

• PWM Frequency: 48–96 kHz (Dynamic auto-adjustment)

• Mounting Holes: 30.5x30.5mm, M3 (Shock-absorbing design)

• BEC Output: 5V @ 0.6A

• Weight: ~15g (without wires)

• Size: 52 x 42 x 6.6mm

What’s Included

• 1x Hobbywing XRotor G2 Micro 65A 4-in-1 ESC

• 1x XT60 Power Lead with factory-soldered 12AWG silicone wire

• 1x Low-ESR 35V Capacitor (680uF/470uF)

• 1x 8-Pin Wiring Harness for Flight Controller connection

•