Easily customize your Shadow Seeker with a premade LED set!
These are ready to glue right in to the pre-made slots on the plane. Back to back strips for the wings allow one color to shine brightly on the ground while another color makes the top of the wing glow. All connectors, soldering, and heat shrink are completed for you using gray/white wire to blend in with the wing colors.
Package B was designed to be installed as shown below and highlighted in pictures, but feel free to flip over strips to find new color combinations.
Use 3s/12V power only!
Note: Do not use hot glue as LEDs (especially white) will re-melt the glue.