STRIX Rocket 30A ESC with XT60, Attached Bullets, and JST Power Lead
by STRIX

STRIX Rocket 30A ESC with XT60, Attached Bullets, and JST Power Lead

Power your aircraft with confidence using the STRIX Rocket 30A ESC, a customized speed controller designed specifically for the needs of FPV pilots, educational builds, and sUAS platforms. While it features custom hardware modifications by STRIX to streamline your build process, at its core, it utilizes the reliable architecture of the Flycolor 30A Flydragon Lite.

Plug-and-Play Simplicity Gone are the days of tedious soldering during a field repair or new build. The STRIX Rocket 30A features 2mm female bullet connectors soldered directly to the board. This allows you to plug your motor leads straight into the ESC without messy intermediate wires, saving weight and reducing clutter in tight fuselages like the STRIX Goblin or Nano Goblin.

Powered for Night Flying Unique to this model is a dedicated JST power lead soldered parallel to the battery input. This addition is specifically designed to power STRIX Noctua Glow LED systems or other 12V peripherals directly from your flight battery, eliminating the need for splicing into your main power harness.

Reliable Performance & Programming With a continuous current rating of 30A and a burst capability of 40A, this ESC handles the demands of 2S to 4S LiPo setups with ease. Input power is delivered via a pre-installed 10cm wire with an XT60 connector. For pilots needing to adjust timing, brake settings, or start-up modes, this ESC is based on the Flycolor 30A Flydragon Lite ESC for flashing and programming purposes. Please refer to programming guides and cards compatible with the Flydragon Lite series when configuring this unit.

Features:

• Direct-Mount Bullets: 2mm female bullet connectors soldered directly to the PCB for a clean, wire-free motor connection.

• Auxiliary Power: Pre-installed JST lead perfect for powering LED systems or FPV gear.

• Flycolor Architecture: Based on the Flycolor 30A Flydragon Lite for easy programming and reliability.

• Ready to Fly: Comes with a 10cm power lead and XT60 connector already installed.

• Safety Protections: Includes Low-Voltage Cutoff, Over-Heat Protection, and Throttle Signal Loss Protection.

Specifications:

• Continuous Current: 30A
• Burst Current: 40A (up to 10 seconds)
• Input Voltage: 2-4S LiPo
• BEC Output: 5V / 2A (Linear Mode)
• Battery Connector: XT60 (on 10cm wire)
• Motor Connectors: Board mounted 2mm Female Bullets
• Auxiliary Connector: JST-RCY Power Tap (on 10cm wire)
• Programming Base: Flycolor 30A Flydragon Lite
• Dimensions: 45mm x 15mm x 5mm (Super small!)
• Weight: ~14.7g (with wires and connectors)

What is Included:

• (1) STRIX Rocket 30A ESC