The NewBeeDrone Hummingbird V4 BNF Whoop is a high-performance 65mm micro FPV quadcopter engineered from the ground up to offer the perfect blend of agility, durability, and raw power for both indoor and park flying. Built completely out of premium components, this micro whoop features a signature ultra-light frame and an adjustable camera canopy (from 5° to 55°), ensuring exceptional crash resistance during intense proximity flying. Under the hood, a set of high-KV brushless motors spin custom tri-blade propellers, delivering a highly locked-in, smooth, and nimble flight experience right out of the box with zero tuning required.
The heart of this setup is an advanced All-in-One Flight Controller, which packs the flight computer, a 12A ESC pre-flashed with high-performance 48kHz firmware, an ExpressLRS receiver, and a video transmitter onto a single ultra-compact board. It introduces an advanced temperature control VTX, which automatically throttles output power from 25mW up to a powerful 400mW, giving you pristine analog video and maximum penetration behind walls without overheating. Equipped with solder-free plug-and-play connectors for both the motors and camera, along with customizable edge-mounted RGB LEDs, this whoop makes park racing and living room acrobatics incredibly fun, accessible, and easily repairable.
Drone Wheelbase Size: 65 mm Micro Tiny Whoop
All-in-One Flight Controller: Integrated ESC, RX, and VTX board
Processor Architecture & Gyro: STM32F411 MCU with BMI270 IMU
Integrated Electronic Speed Controller (ESC): 12A Continuous pre-flashed with 48kHz Bluejay firmware
Motor Connectors: JST-1.0 3-Pin plug-and-play sockets
Onboard Video Transmitter (VTX): 25mW to 400mW dynamic temperature control with 5.8GHz antenna
FPV Optics System: Analog Camera with adjustable canopy angle (5° to 55°)
Onboard Receiver Unit: SPI ExpressLRS 2.4GHz with MHF3 connector antenna
On-Screen Display (OSD): Graphical OSD compatible with Betaflight
Brushless Motor Stators: Ultra-lightweight 0702 30000KV motors
Propeller Assemblies: Tri-Blade 31mm Propellers
Battery Input Requirement: 1S LiPo / LiHV Only
Power Pigtail Lead Connector: Solid-pin high-conductivity connection
Flight Controller Mount Footprint: 25.5 mm x 25.5 mm standard pattern
Total Dry Hardware Weight: Approximately 19.5 grams (without battery)
1 x NewBeeDrone Hummingbird V4 BNF Whoop (Pre-assembled)
1 x Set of Tri-Blade 31mm Propellers
| Name | Value |
|---|---|
| MANUFACTURER | NewBeeDrone |
| SIZE CLASS | Micro Whoop |
You can also contact us at support@readymaderc.com.
Or give us a call at +1(740)-936-4500.