HGLRC Rekon7 Pro Long Range Frame Kit
by GepRC

The HGLRC Rekon7 Pro V2 7-Inch Long-Range Frame Kit is an ultra-rigid airframe designed specifically for long-range FPV cruising, high-altitude mountain surfing, and commercial payload operations. Engineered to support up to 7-inch propellers, the Rekon7 Pro V2 features 6mm thick carbon fiber arms reinforced with a triangular rib structure to minimize low-frequency motor resonance, reduce prop wash, and stabilize flight controller gyro feedback during long-distance flights.

Constructed with a CNC aluminum front camera cage, the frame provides physical protection for HD digital cameras—including the DJI O3 and O4 Air Units—and standard analog lenses. The chassis features mounting options for 30.5x30.5mm and 20x20mm flight stacks, along with dedicated rear VTX mounting bays, TPU antenna mounts, GPS enclosures, and customizable RGB lighting elements.

Key Features

• Triangular Reinforcement Architecture: Rib-braced arm design minimizes frame flex and flight vibration for clean HD video recording and PID tuning stability.

• Heavy-Duty 6mm Carbon Fiber Arms: High-rigidity 6mm arms provide structural durability during hard landings and minimize resonance under high motor torque.

• CNC Aluminum Front Camera Cage: Precision-machined aluminum housing shields camera lenses from direct impacts while accommodating 19mm and 20mm FPV cameras.

• Multi-System HD & Analog Compatibility: Flexible VTX and camera mounting accommodates DJI O3 Air Unit, DJI O4 Air Unit, Walksnail Avatar, HDZero, and high-power analog VTXs.

• Integrated TPU Accessory Suite: Includes factory 3D-printed TPU mounts for GPS modules, vertical VTX antennas, ELRS T-antennas, buzzers, and action cameras (GoPro mount).

• Versatile Stacking Support: Supports dual 30.5x30.5mm and 20x20mm stack configurations to accommodate high-current 60A+ ESCs and advanced flight controllers.

Technical Specifications

• Brand / Manufacturer: HGLRC / Rekon FPV

• Model Identifier: Rekon7 Pro V2 7-Inch Frame Kit

• Frame Wheelbase: 324 mm

• Frame Layout: Deadcat / Wide-X Hybrid Long Range

• Arm Thickness: 6.0 mm (Front & Rear)

• Top Plate Thickness: 2.0 mm

• Middle Plate Thickness: 3.0 mm

• Bottom Plate Thickness: 2.0 mm

• Camera Side Plate Thickness: 2.0 mm

• Overall Dimensions: 254 mm x 341 mm

• Bare Frame Weight: ~383 grams (including hardware, TPU mounts, and anti-slip pad)

• Flight Controller Mounting: 30.5mm x 30.5mm (M3) / 20mm x 20mm (M3)

• VTX Mounting: 25.5mm x 25.5mm (M2) / 20mm x 20mm (M2) / 30.5mm x 30.5mm (M3)

• Motor Mounting Pattern: 19mm x 19mm (M3) / 16mm x 16mm (M3)

• Camera Mount Compatibility: 19mm Micro / 20mm Digital (DJI O3/O4 compatible)

• Recommended Motor Size: 2806.5 / 2807 / 2809 Brushless Motors

• Recommended Propeller Size: 7.0 Inches (Bi-Blade or Tri-Blade)

What Is Included

• (1) HGLRC Rekon7 Pro V2 Carbon Fiber Frame Hardware Set (Top, Middle, Base Plates & 6mm Arms)

• (1) CNC Aluminum Front Camera Protection Cage

• (1) TPU GoPro Mount

• (1) TPU GPS Mount

• (1) TPU Antenna & Receiver Mount Set

• (1) TPU Buzzer Mount

• (2) 20x250mm Non-Slip Battery Straps

• (1) Silicone Anti-Slip Battery Pad

• (1) Complete Frame Assembly Hardware & Standoff Pack

Needed to Complete

• (1) 30.5x30.5 or 20x20 Flight Controller (e.g., F405 / F722 / H743)

• (1) 4-in-1 ESC (50A – 65A+ Continuous)

• (4) 2806.5 – 2809 Brushless Motors (1300KV – 1500KV for 6S)

• (4) 7-Inch Propellers (e.g., HQProp DP7X4X3)

• (1) FPV Camera & Video Transmitter (DJI O3/O4 Air Unit or Analog VTX + Camera)

• (1) Long-Range Radio Receiver (ExpressLRS 2.4G/900M or TBS Crossfire)

• (1) M80 / M100 GPS Module with Compass

• (1) 6S LiPo (3000mAh – 4500mAh) or 6S2P Li-Ion (4000mAh – 8000mAh) Battery Pack