The BrotherHobby Tornado T5 Pro 3115 900KV Brushless Motor (Item ID: p0088) is a high-torque, large-stator outrunner motor engineered for X-Class racing drones, heavy-lift FPV cinelifters, and 8-inch to 10-inch long-range multirotors. Built around a massive 3115 stator (31mm diameter by 15mm height) in a 12N14P electromagnetic configuration, the T5 Pro combines ultra-thin 0.2mm Kawasaki silicon steel laminations with high-temperature N52H curved arc magnets to deliver high magnetic flux density, rapid throttle response, and sustained efficiency under heavy propeller loads.
Machined from high-strength 7075 aluminum alloy for both the bell cap and base casing, the Pro revision upgrades internal mechanical retention by replacing traditional C-clips with a precision bottom shaft screw securing a lightweight titanium alloy hollow shaft. Supported by oversized Japanese NMB 11x5x5mm ball bearings and rated for 5S to 8S LiPo power systems, the motor ships with extended 30cm 16AWG silicone leads for direct routing along long carbon fiber arms and weighs 116 grams with full wires.
Large-Torque 3115 Stator Architecture: 31mm x 15mm stator with 0.2mm Kawasaki silicon steel laminations and 12N14P pole layout produces high rotational torque to spin 8-inch through 10-inch propellers with authority.
Upgraded Pro Shaft Screw Retention: Replaces legacy C-clips with a bottom retaining screw on a hollow titanium alloy shaft, improving impact durability and simplifying bell maintenance.
7075 Aluminum Bell & Base Housing: CNC-machined 7075 aircraft-grade aluminum bell cap and base resist deformation during crashes while dissipating heat across sustained high-throttle runs.
High-Grade N52H Arc Magnets: Precision-curved N52H neodymium magnets minimize air-gap losses and resist demagnetization at elevated operating temperatures.
Oversized Japanese NMB Bearings: Dual 11mm x 5mm x 5mm Japanese NMB ball bearings support high radial and axial prop loads for smooth, low-vibration operation.
Extended 30cm 16AWG Silicone Leads: Factory-installed 300mm 16AWG high-strand silicone motor wires accommodate large X-Class and cinelifter arm lengths without requiring wire splicing.
KV Rating: 900KV
Stator Size: 3115 (31.0 mm diameter x 15.0 mm height)
Configuration: 12N14P (12 Stator Slots / 14 Rotor Poles)
Input Voltage / Cell Count: 5S – 8S LiPo
Stator Laminations: 0.2 mm Kawasaki Silicon Steel
Rotor Magnets: N52H Curved Arc Magnets
Bell & Base Casing Material: CNC-Machined 7075 Aluminum Alloy
Shaft Material & Design: Titanium Alloy Hollow Shaft with Bottom Retaining Screw
Propeller Adapter Shaft Thread: M5 (5.0 mm CW Thread)
Bearings: Japanese NMB Ball Bearings (11.0 mm x 5.0 mm x 5.0 mm)
Mounting Bolt Pattern: 19.0 mm x 19.0 mm (M3 Threaded Holes)
Motor Lead Wires: 16AWG Silicone Wire, 300 mm (30 cm) Length
Overall Motor Dimensions: ~37.5 mm diameter x 49.5 mm height (including prop shaft)
Net Weight: 116.0 grams (including 30cm 16AWG wires)
Recommended Propeller Size: 8-inch to 10-inch Propellers (e.g., 8x4.5, 9x4.5, 9x5, 10x4.5, 10x5)
Target Applications: X-Class FPV Racing, Heavy-Lift Cinelifters, 8"–10" Long-Range Drones, and Macro Multirotors
(1) BrotherHobby Tornado T5 Pro 3115 900KV Brushless Motor (with 30cm 16AWG Silicone Wires)
(1) M5 Flanged Aluminum Propeller Locknut
(4) M3 Motor Mounting Screws
| Name | Value |
|---|---|
| MANUFACTURER | Brother Hobby |
| STATOR DIAMETER | 31 |
| STATOR HEIGHT | 15 |
| KV | 900 |
| THREAD DIRECTION | Standard |
| SHAFT FOR COLLET MOUNT | no |
| GTIN | 721248877192 |