The BrotherHobby Tornado T5 Pro 3115 640KV Brushless Motor (Item ID: p0088) is a low-KV, ultra-high-torque outrunner motor engineered specifically for large-propeller X-Class racing drones, heavy-lift FPV cinelifters, and 10-inch to 12-inch long-range multirotors. Built around an oversized 3115 stator (31mm diameter by 15mm height) in a 12N14P electromagnetic configuration, this 640KV variant pairs ultra-thin 0.2mm Kawasaki silicon steel laminations with high-temperature N52H curved arc magnets to swing large-diameter propellers smoothly at lower RPMs without overheating.
CNC-machined from high-strength 7075 aluminum alloy for both the bell cap and base housing, the Pro revision replaces traditional C-clips with a bottom shaft retaining screw securing a lightweight hollow titanium alloy shaft for enhanced impact resilience and simplified maintenance. Supported by oversized Japanese NMB 11x5x5mm ball bearings and rated for 5S to 8S LiPo power systems—capable of generating over 4,000 grams of peak thrust on a 12x4 propeller at 6S—the motor ships with extended 30cm 16AWG silicone leads for clean routing along long carbon fiber arms and weighs 116 grams with full wires.
Low-KV 640KV High-Torque Windings: Tuned specifically to swing 10-inch through 12-inch propellers on 5S to 8S LiPo setups, maximizing efficiency, flight endurance, and lift capacity under heavy camera payloads.
Oversized 3115 Stator with 0.2mm Laminations: 31mm x 15mm stator constructed from 0.2mm Kawasaki silicon steel in a 12N14P pole layout minimizes eddy-current losses and delivers smooth, low-vibration throttle response.
Upgraded Pro Bottom-Screw Shaft Retention: Secures the hollow titanium alloy shaft with a bottom retaining screw rather than a C-clip, preventing bell separation during hard landings and simplifying bearing service.
7075 Aircraft-Grade Aluminum Bell & Base: Precision-machined 7075 aluminum housing withstands structural shock while maximizing thermal dissipation across sustained heavy-lift climbs.
High-Temperature N52H Curved Arc Magnets: Precision-contoured N52H neodymium magnets maintain tight air-gap tolerances and resist thermal demagnetization under continuous high-amp loads.
Oversized Japanese NMB Bearings: Dual 11mm x 5mm x 5mm Japanese NMB ball bearings absorb heavy radial and axial propeller loads for smooth, gyro-clean operation.
Extended 30cm 16AWG Silicone Leads: Factory-installed 300mm 16AWG high-strand silicone wires reach central ESCs or arm-mounted single ESCs on large X-Class and cinelifter frames without splicing.
KV Rating: 640KV
Stator Size: 3115 (31.0 mm diameter x 15.0 mm height)
Configuration: 12N14P (12 Stator Slots / 14 Rotor Poles)
Input Voltage / Cell Count: 5S – 8S LiPo
Peak Bench Performance (6S / 23.8V, 12x4 Prop): ~4,020g Max Thrust | ~48.3A Max Current | ~1,150W Max Power
Stator Laminations: 0.2 mm Kawasaki Silicon Steel
Rotor Magnets: N52H Curved Arc Magnets
Bell & Base Casing Material: CNC-Machined 7075 Aluminum Alloy
Shaft Material & Design: Titanium Alloy Hollow Shaft with Bottom Retaining Screw
Propeller Adapter Shaft Thread: M5 (5.0 mm CW Thread)
Bearings: Japanese NMB Ball Bearings (11.0 mm x 5.0 mm x 5.0 mm)
Mounting Bolt Pattern: 19.0 mm x 19.0 mm (M3 Threaded Holes)
Motor Lead Wires: 16AWG Silicone Wire, 300 mm (30 cm) Length
Overall Motor Dimensions: ~37.5 mm diameter x 49.5 mm height (including prop shaft)
Net Weight: 116.0 grams (including 30cm 16AWG wires)
Recommended Propeller Size: 10-inch to 12-inch Propellers (e.g., 10x4.5, 10x5, 11x4.5, 12x4)
Target Applications: Heavy-Lift FPV Cinelifters, X-Class Racing Drones, 10"–12" Long-Range Drones, and Macro Multirotors
(1) BrotherHobby Tornado T5 Pro 3115 640KV Brushless Motor (with 30cm 16AWG Silicone Wires)
(1) M5 Flanged Aluminum Propeller Locknut
(4) M3 Motor Mounting Screws
| Name | Value |
|---|---|
| MANUFACTURER | Brother Hobby |
| STATOR DIAMETER | 31 |
| STATOR HEIGHT | 15 |
| KV | 640 |
| THREAD DIRECTION | Standard |
| SHAFT FOR COLLET MOUNT | no |