HGLRC Thor Pro Balance Charging Board XT30/XT60 w/ Integrated Discharger - 4 Ports
by STRIX

The HGLRC Thor Pro Balance Charging Board XT30/XT60 with Integrated Discharger (4-Port Version) is a highly ruggedized, professional-grade parallel power distribution hub engineered to optimize multi-battery field charging and fleet management workflows. Designed to concurrently charge up to four 2S to 6S LiPo or LiHV battery packs, this high-amperage board handles a massive 40A maximum input current and a high-efficiency 2A balance current. Safety is tightly governed at the hardware level; each individual XT30 and XT60 port is backed by its own dedicated 15A automotive blade fuse to isolate overcurrent faults, while the cell balancing lines are reinforced with self-resetting thermal fuses between every pin. Should a cross-wiring or short-circuit anomaly occur, onboard diagnostic LED indicators immediately illuminate to pinpoint the fault location, preventing catastrophic damage to connected electronics, standard single-channel smart chargers, or high-value lithium cells.

Beyond high-speed parallel replenishment, the Thor Pro features a completely autonomous, end-of-board smart discharge module that operates independently from the main charger input line. Utilizing a crisp digital display and an integrated push-button interface, operators can select cell counts from 2S to 6S to automatically draw down remaining flight energy to a precise, safe 3.8V per cell storage voltage, utilizing built-in load resistors that safely shed power at approximately 0.5A for 6S configurations. This dual-purpose utility satisfies the rigorous demands of multiple highly technical end-user segments: FPV drone racers and RC hobbyists can drastically consolidate their charging real estate; secondary and university aerospace robotics classrooms obtain a highly tangible physical testbed for studying electrical load distribution, parallel circuit mechanics, and smart fuse safety; while commercial sUAS airframe manufacturers, defense contractors, and tactical government or military logistics personnel are equipped with a low-SWaP, field-resilient tool to rapidly cycle, discharge, and preserve critical remote-reconnaissance flight batteries in the field.

Technical Specifications

• Supported Battery Type: LiPo / LiHV (Lithium Polymer / High Voltage Lithium)

• Cell Count Configuration Compatibility: 2S to 6S (7.4V to 22.2V)

• Total Number of Charge Ports: 4 Ports

• Integrated Charge Port Connectors: Dual XT30 and XT60 Interfaces per Port

• Maximum Continuous Input Current: 40A

• Maximum Continuous Balance Current: 2A

• Main Circuit Overcurrent Protection: Individual 15A Automotive Blade Fuses per Port

• Balance Line Overcurrent Protection: Self-Resetting Thermal Fuses between every pin

• Short Circuit Diagnostic System: Integrated Fault-Location LED Indicators

• Integrated Discharger Cut-off Target: Fixed 3.8V per cell (Standard Lithium Storage Voltage)

• Discharger Operational Interface: Digital Segment Display with Manual Cell Selection Button

• Average Discharging Current: ~0.5A (Dependent on battery pack voltage string)

• Output Charging Interconnect: XT60 Female to XT60 Female Cable & 6S JST-XH Balance Cable

What Is Included

• (1) HGLRC Thor Pro 4-Port Parallel Balance Charging Board with Integrated Discharger

• (1) High-Flexibility 6S JST-XH Balance Interconnect Ribbon Cable (200mm)

• (1) Heavy-Duty XT60 Female-to-Female Power Supply Cable (200mm)

• (4) Spare 15A Automotive Blade Fuses

• (1) Technical Operation Manual