HOBBYWING XRotor FPV 2807 1300KV Motor
by HobbyWing

Power your heavy-lift and long-range aircraft with the HOBBYWING XRotor FPV 2807 1300KV Motor. Meticulously optimized for the high-voltage requirements of 4S to 6S LiPo configurations, this premium brushless outrunner delivers an exceptional balance of brute torque and linear control resolution for 7-inch and 8-inch FPV multirotors, cinematic cinelifters, and custom sUAS setups. It is constructed using high-performance 0.2mm silicon steel laminations and arc-shaped N52 strong magnetic tiles that maximize magnetic flux density, generating a massive peak thrust of up to 2818 grams. The internal multi-strand enameled wire winding layout increases the slot full rate by over 5%, reducing internal resistance while maintaining a smooth, vibration-free power band from hover to full-throttle speed runs.

Thermal longevity and operational safety are structural priorities during prolonged or heavy-payload operations. The XRotor 2807 1300KV features an integrated active self-cooling rotor design that actively pulls airflow through the core bell housing, dropping internal temperatures and extending the motor's maximum continuous full-load runtime by over 40% compared to standard configurations. To prevent structural hardware failures during aggressive high-G maneuvers or rapid throttle reversals, the motor utilizes a hardened 5mm steel shaft paired with a grooved, tooth-groove anti-slip propeller mounting surface. This precise mechanical interface firmly locks the propeller hub in place, completely eliminating prop slippage. Outfitted with high-temperature 200°C resistant enameled copper windings and pre-soldered with flexible 200mm 18AWG silicone leads, this rugged motor supplies the industrial-grade performance and endurance required for advanced RC hobby builds, academic aerospace labs, and tactical unmanned surveillance platforms.

Technical Specifications

• Stator Size Dimensions: 2807

• KV Motor Velocity Constant: 1300KV

• Motor Type Architecture: Brushless Outrunner

• Supported Input Voltage Envelope: 4S to 6S LiPo (14.8V - 22.2V)

• Configuration Layout: 12N14P (12 Slots, 14 Poles)

• Maximum Continuous Current: 56.7A (For 6-second peak bursts)

• Maximum Continuous Power: 1361W (For 6-second peak bursts)

• Peak Propeller Thrust Output: 2818 grams

• No-Load Idle Current Draw: 2A @ 24V

• Internal Phase Resistance: 53.8 mΩ

• Motor External Core Size: Φ34 mm x 20.5 mm

• Shaft Diameter Profile: 5 mm (M5 Threaded Propeller Shaft)

• Exposed Shaft Length: 15 mm

• Motor Wire Gauge: 18 AWG Flexible Silicone Wire

• Motor Wire Length: 200 mm

• Enameled Wire Insulation Class: 200°C High-Temperature Resistance (H-Class)

• Base Mounting Pattern Size: 19 x 19 mm standard spacing (4x M3 Threaded Holes)

• Total Weight: 59 grams (Including full-length motor wires)

What's Included

• 1 x HOBBYWING XRotor FPV 2807 1300KV Brushless Motor

• 1 x Low-Profile M5 Aluminum Propeller Lock Nut

• 1 x Complete Set of High-Tensile M3 Motor Mounting Screws