EMAX E3 Series 2207 Brushless Motor - 2400kV
by EMAX

The EMAX E3 Series 2207 2400KV Brushless Motor is a high-performance propulsion system precision-engineered for 5-inch FPV racing and freestyle drones. Designed to deliver an optimal balance of raw power, efficiency, and precise control, the E3 Series represents a significant step forward for pilots seeking a locked-in, ultra-responsive flight experience. The 2400KV variant is specifically optimized for high-velocity 3S to 4S LiPo power configurations, making it a go-to choice for traditional 4S drone setups that demand explosive top-end speed alongside smooth, predictable throttle resolution across the entire band.

At its core, the motor features a robust 12N14P framework paired with a durable 4mm bearing shaft that ensures long-term reliability and extreme resistance to harsh flight impacts. Generating a maximum power rating of up to 750W on a 4S setup and managing a peak current of 45A, this motor provides the aggressive torque and rapid RPM transitions required to snap through tight racing gates or recover seamlessly from intense freestyle maneuvers. To keep weight to an absolute minimum without sacrificing structural strength, the E3 2207 utilizes a lightweight base design weighing a mere 31.5 grams. Completed with pre-soldered, heavy-duty 20AWG silicone lead wires spanning 120mm, this motor provides custom drone builders, commercial sUAS manufacturers, and hobbyists with a premier, high-fidelity propulsion foundation.

Technical Specifications

• Motor Series: EMAX E3 Series 2207

• Velocity Constant (KV): 2400KV

• Stator Dimensions: 22 mm x 07 mm

• Stator Framework Configuration: 12N14P

• Supported Input Voltage (Cells): 3S - 4S LiPo

• Maximum Continuous Power (4S): 750W

• Peak Continuous Current (4S): 45A

• Idle Current (at 10V): 2.1A

• Internal Motor Resistance: 48 mΩ

• Bearing Shaft Diameter: 4 mm

• Overall Motor Dimensions: Φ28.6 mm x 32.8 mm

• Motor Mounting Bolt Pattern: 19 mm x 19 mm standard grid

• Pre-installed Lead Wires: 20#AWG silicone wire, 120 mm length

• Recommended Propeller Specification: 5-inch to 5.5-inch multirotor propellers

• Net Hardware Weight: 31.5 grams (excluding silicone wire weight)

What's Included

• 1 x EMAX E3 Series 2207 2400KV Brushless Motor

• 1 x Aluminum M5 Nylock Propeller Lock Nut

• 1 x Complete Mounting Fastener Kit (M3 screws and shaft washer hardware)